CGPJY - SEMI-FALT BLACK LATEX, A41B00002

  • MSDS: CGPJY
  • Manufacturer: KRYLON HARDWARE
  • Product Name: SEMI-FALT BLACK LATEX, A41B00002
  • National Stock Number: 8010-00N082998
Product Identification

Product ID:SEMI-FALT BLACK LATEX, A41B00002
MSDS Date:05/19/1997
FSC:8010
NIIN:00N082998
MSDS Number: CGPJY

Responsible Party
KRYLON HARDWARE
31500 SOLON RD
SOLON, OH 44139
US

Emergency Phone: 216-566-2917

Info Phone: 800-832-2541

Cage: JO346

Contractor
SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
BEDFORD HEIGHTS, OH 44146 US

Telephone: 216-292-7400 OR 216-595-8634

Cage: 09800

Ingredients

0.60

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 3%

OSHA PEL 50 PPM, S

ACGIH TLV: 25 PPM, S


ETHANOL, 2-ETHOXY-, ACETATE; (2-(2-BUTOXYETHOXY)-ETHANOL)

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 3%

OSHA PEL N/K

ACGIH TLV: N/K


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 8%

OSHA PEL 20 MPPCF Z-3

ACGIH TLV: 2 MG/M3 RDUST


0.00

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 2%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


GLYCOL ETHERS

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: N/K


1.68 LBS/GAL; 201

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRIT OF EYES, SKIN & UPPER
RESP SYS. IN CONFINED AREA VAPS IN HIGH CONC MAY CAUSE HDCH,
NAUS/DIZZ. SIGNS & SYMPS OF OVEREXP: REDNESS & TEARING/BURNING
SENSATION MAY INDICATE EYE/EXCESS SKIN EX POS. CHRONIC: PRLNG
OVEREXP TO SOLV INGS MAY CAUSE ADVERSE EFTS TO LIVER, URINARY &
BLOOD FORMING SYS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CARBON BLACK: IARC MONOGRAPHS, VOLUME
65, PAGE 149, 1996: GROUP 2B. ANIMAL: LUNG.
Effects of Overexposure:HLTH HAZ: ANIMAL STUDIES CLEARLY DEMONSTRATED
DOSE-RELATED ADVERSE EFTS ON CNS, HEMATOPOIETIC TISS, BLOOD,
KIDNEYS, & LIVER, ASSOC W/ADMIN OF ETHYLENE GLYCOL MONOBUTYL ETHER
(EGBE) (EXTRACTED FROM DHH S (NIOSH) PUBLICATION #90-118) .
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM AND QUIET. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. REMOVE
CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. EYES: FLUSH WITH
LARGE AMOUN TS OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. INGESTION: GET MEDICAL ATTENTION.

Fire Fighting

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZ ARE
PREF. WATER MAY BE USED TO COOL CLSD (SUP DAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO THE
BUILD-UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE ONLY W/ADEQ VENT. AVOID BRTHG VAPS
& SPRAY MIST. AVOID CONT W/SKIN & EYES. KEEP CONTR CLSD WHEN NOT IN
USE. DO NOT TAKE INTERNALLY.
Other Precautions:TRANSFER ONLY TO APPRVD CONTRS W/COMPLETE & APPROP
LABELING. KEEP OUT OF REACH OF CHILDREN. THIS COATING MAY CONTAIN
MATLS CLASSIFIED AS NUISANCE PARTICULATES (LISTED "AS DUST" IN INGS
SECTION) WHICH MAY BE PRESENT AT HAZ LEVELS (SUP DAT)

Exposure Controls

Respiratory Protection:IF PERS EXPOS CANNOT BE CONTROLLED BELOW APPLIC
LIMS BY VENT, WEAR PROPERLY FITTED ORG VAP/PARTICULATE RESP APPRVD
BY NIOSH FOR PROT. WHEN SANDING/ABRADING DRIED FILM, WEAR DUST/MIST
RESP APPRVD BY NI OSH FOR DUST WHICH MAY BE (SUP DAT)
Ventilation:LOC EXHST PREF. GEN EXHST ACCEPTABLE IF EXPOS IS MAINTAINED
BELOW APPLIC LIMS. REFER TO OSHA STDS 1910.94, (SUP DAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
FIRE FIGHT PROC: CONTRS TO PVNT PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO
WHEN EXPOSED TO EXTREME HEAT. OTHER PREC: ONLY DURING
SANDING/ABRADING OF DRIED FILM. RESP PROT: GENERATED FROM THIS
PROD, UNDERLY ING PAINT/ABRASIVE. VENT: 1910.107, 1910.108.

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.11
pH:9.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:66

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:WASTE FROM THIS PRODUCT IS NOT HAZARDOUS AS
DEFINED UNDER RCRA 40 CFR 261. INCINERATE IN APPROVED FACILITY. DO
NOT INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.