CGRJX - SILICON CARBIDE WHISKER REINFORCED ALUMINA, CC670
- MSDS: CGRJX
- Manufacturer: SANDVIK COROMANT CO
- Product Name: SILICON CARBIDE WHISKER REINFORCED ALUMINA, CC670
- National Stock Number: 9650-00N083788
Product Identification
Product ID:SILICON CARBIDE WHISKER REINFORCED ALUMINA, CC670
MSDS Date:01/01/1992
FSC:9650
NIIN:00N083788
MSDS Number: CGRJX
Responsible Party
FAIR LAWN, NJ 07410
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 201-794-5000
Cage: 17411
Contractor
Telephone: 201-797-5000
Cage: 17411
Ingredients
3) (SARA 313)
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: 50-90%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICON CARBIDE; (WHISKERS)
CAS: 409-21-2
RTECS: VW0450000
Fraction By Weight: 10-40%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICON CARBIDE (NON-WHISKERS)
CAS: 409-21-2
RTECS: VW0450000
Fraction By Weight: 0-10%
OSHA PEL N/K
ACGIH TLV: N/K
MASK AIR PURIFYING RESP W/DUST/MIST/FUME OR HIGH
RTECS: 9999999ZZ
FACEPIECE AIR PURIFYING RESP W/HIGH EFFICIENCY
RTECS: 9999999ZZ
PURIFYING RESP W/HIGH EFFICIENCY FILTER. UP TO 20
RTECS: 9999999ZZ
IN POSITIVE PRESSURE MODE. ABOVE 20 MG/M3 (CO) OR
RTECS: 9999999ZZ
IN POSITIVE PRESSURE MODE OR SUPPLIED AIR RESP
RTECS: 9999999ZZ
AUXILIARY SELF CONTAINED AIR SUPPLY.
RTECS: 9999999ZZ
PEL OR TLV. IF SUCH EQUIPMENT IS NOT AVAILABLE, USE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EXPOSURE TO ALUMINUM OXIDE DUST
CAN IRRITATE THE EYES, NOSE AND THROAT. SKIN: CONTACT WITH THIS
PRODUCT MAY CAUSE IRRITATION AND SKIN RASH. CHRONIC: REPEATED
EXPOSURES TO LARGE AMOUNTS OF ALUMI NUM OXIDE DUST MAY DAMAGE THE
LUNGS, LEADING TO PNEUMONIA AND TO SCARRING OF LUNGS WITH SHORTNESS
OF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: BREATH AND CHEST TIGHTNESS.
Medical Cond Aggravated by Exposure:CERTAIN SKIN CONDITIONS (SUCH AS
DRY SKIN) MAY BE AGGRAVATED BY EXPOSURE.
First Aid
First Aid:INHAL: IF SYMPS OF PULMONARY INVOLVEMENT DEVELOP (COUGHING,
WHEEZING, SHORTNESS OF BREATH, ETC), REMOVE FROM EXPOS & SEEK MED
ATTN. SKIN: REMOVE CONTAMD CLTHG & THOROUGHLY WASH AFFECTED AREA
W/SOAP & WATER. IF PERSISTENT RASH OR IRRIT OCCURS, SEEK MED ATTN.
EYES: FLUSH W/LARGE AMTS OF WATER FOR AT LEAST 15 MIN. IF IRRIT
PERSISTS, SEEK MED ATTN. INGEST: IF SUBSTANTIAL QTYS ARE SWALLOWED,
(SUPDAT)
Fire Fighting
Extinguishing Media:USE DRY POWDER EXTINGUISHER APPROPRIATE FOR USE
WITH METAL DUST FIRES.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT A FIRE HAZARD. HOWEVER, DUSTS
PRODUCED FROM GRINDING MAY BE FLAMMABLE AND MAY POSE A FIRE HAZARD
IF ALLOWED TO ACCUMULATE.
Accidental Release
Spill Release Procedures:PRECAUTIONS SHOULD BE TAKEN THAT THE MATERIAL
DOES NOT BECOME AIRBORNE DURING CLEANUP OPERATIONS. SPILL RESIDUE
OR UNUSED MATERIAL SHOULD BE PLACED IN A RIGID, AIRTIGHT CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MAINTAIN GOOD HOUSEKEEPING PROCEDURES
TO PVNT DUST ACCUMULATION DURING GRINDING. PRECAUTIONS SHOULD BE
TAKEN TO AVOID SPILLAGE & CONTAM OF CLOTHING.
Other Precautions:STORAGE SHOULD IN IN RIGID, AIRTIGHT CONTAINERS.
MATERIAL SHOULD NOT BE REMOVED FROM WORKSITE IN AN UNCONTROLLED
MANNER.
Exposure Controls
Respiratory Protection:USE AN APPROPRIATE NIOSH APPRVD RESP IF AIRBORNE
DUST CONCENTRATIONS EXCEED APPROP PEL OR TLV. ALL APPROP REQS AS
SET FORTH IN 29 CFR 1910.134 SHOULD BE MET. PROTECTION FACTORS FOR
RESPS RECOMMENDED B ELOW ARE BASED UPON THOSE AS (SUPDAT)
Ventilation:USE LOCAL EXHAUST VENT WHICH IS ADEQUATE TO LIMIT PERSONAL
EXPOSURE TO AIRBORNE DUSTS WHICH DO NOT EXCEED THE (ING 10)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MATL TO AVOID: W/STRONG ACIDS. HOT CHLORINATED RUBBER: THIS SUBSTANCE
IS INCOMPAT W/ALUMINUM OXIDE. FIRST AID PROC: DILUTE W/LARGE AMT OF
WATER, INDUCE VOMITING & SEEK MED ATTN. RESP PROT: LISTED IN 2 9
CFR 1910.1001(G), TABLE 1. THE FOLLOWING TYPE RESPS SHOULD BE USED
AT A MINIMUM: UP TO 0.5 MG/M3 (CO) - A HALF (ING 4)
Chemical Properties
Spec Gravity:3.7-3.8(H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK GRAY METAL; NO ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS: CNTCT OF DUST W/OXIDIZERS MAY CAUSE FIRE OR EXPLOSIONS.
STRONG ACIDS: THIS PROD MAY REACT VIOLENTLY (SUPDAT)
Stability Condition to Avoid:THIS PRODUCT IS STABLE UNDER NORMAL USE
CONDITIONS.
Hazardous Decomposition Products:REACTION OF ALUMINUM OXIDE WITH
HALOCARBON VAPORS AT HIGH TEMPERATURES PRODUCES HYDROGEN CHLORIDE
AND PHOSGENE.
Disposal
Waste Disposal Methods:SPILL RESIDUES, EMISSION CONTROL DUST OR UNUSED
MATL MAY BE DISPOSED OF IN PERMITTED SANITARY LANDFILL I/A/W
FEDERAL, STATE & LOCAL SOLID WASTE REGS. PRECS SHOULD BE TAKEN TO
ENSURE THAT NO VISIBLE EM ISSIONS TO OUTSIDE AIR OCCUR AT DUMP
SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.