CGTTF - ANTIMONY (III) OXIDE, SB25
- MSDS: CGTTF
- Manufacturer: SPEX CERTIPREP
- Product Name: ANTIMONY (III) OXIDE, SB25
- National Stock Number: 6810-00N084713
Product Identification
Product ID:ANTIMONY (III) OXIDE, SB25
MSDS Date:04/10/1996
FSC:6810
NIIN:00N084713
MSDS Number: CGTTF
Responsible Party
METUCHEN, NJ 08840
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 908-549-7144
Preparer: SUSHA RAMONE
Cage: 04XT3
Contractor
Telephone: 732-549-7144
Cage: 04XT3
Ingredients
ANTIMONY OXIDE; (SB*2O*3) (SARA 313) (CERCLA)
CAS: 1309-64-4
RTECS: CC5650000
Fraction By Weight: 100%
OSHA PEL 0.5 MG (SB)/M3
ACGIH TLV: 0.5 MG (SB)/M3; 9495
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS SOLUTION MAY BE HARMFUL IF
INHALED, INGESTED, OR CONTACTED WITH THE SKIN OR EYES. INHALATION
MAY CAUSE RESPIRATORY TRACT IRRITATION. CONTACT WITH THE SKIN OR
EYES CAN RESULT IN IRRITATION OR AN A LLERGIC SKIN REACTION. POISON
BY INTRAVENOUS AND SUBCUTANEOUS ROUTES. MODERATELY TOXIC BY OTHER
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: ROUTES. AN EXPERIMENTAL NEOPLASTIGEN
AND CARCINOGEN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES OCCASIONALLY
LIFTING UPPER & LOWER EYELIDS. SKIN: REMOVE CONTAMINATED CLOTHING,
THEN FLUSH W/WATER FOR AT LEAST 15 MINUTES. WASH CLOTHING
THOROUGHLY BEFORE REUSE. INHAL: MOVE TO FRESH AIR. INGEST: DO NOT
INDUCE VOMITING. GET IMMEDIATE MEDICAL HELP. IF THE PATIENT IS
CONSCIOUS, GIVE LARGE QTIES OF WATER OR MILK. IF IRRIT CONTINUES,
GET MED ATTN IMMED.
Fire Fighting
Extinguishing Media:APPROPRIATE TO SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE. NOT COMBUSTIBLE.
Accidental Release
Spill Release Procedures:EVACUATE AND VENTILATE AREA. SWEEP UP AND
PLACE IN BAG, HOLD FOR PROPER DISPOSAL. WEAR PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA, IN A TIGHTLY
SEALED CONTAINER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:CHEMICAL FUME HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . LAB COAT.
Work Hygienic Practices:WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
BP: 2822F,1550C, SUBLIMES.
Chemical Properties
Boiling Pt:B.P. Text:SUPDAT
Melt/Freeze Pt:M.P/F.P Text:1202F,650C
Spec Gravity:5.2
Solubility in Water:VERY SLIGHTLY SOL
Appearance and Odor:WHITE POWDER.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, REDUCING AGENTS AND CHLORINATED RUBBER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES.
Disposal
Waste Disposal Methods:CONTACT FEDERAL, STATE AND LOCAL HAZARDOUS OR
CHEMICAL WASTE DISPOSAL AGENCY FOR REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.