CGTWG - CLEANSTART
- MSDS: CGTWG
- Manufacturer: J AND M LABORATORIES INC
- Product Name: CLEANSTART
- National Stock Number: 6850-00N084759
Product Identification
Product ID:CLEANSTART
MSDS Date:06/14/1991
FSC:6850
NIIN:00N084759
MSDS Number: CGTWG
Responsible Party
LOUISVILLE, KY 40203
US
Emergency Phone: 502-585-3176
Info Phone: 800-473-6173
Cage: GO699
Contractor
Telephone: 800-473-6173/502-585-3176
Cage: 01VT9
Ingredients
METAPHOSPHORIC ACID, HEXASODIUM SALT; (SODIUM
CAS: 10124-56-8
RTECS: OY3675000
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LIGNOSULFONIC ACID, SODIUM SALT; (SODIUM LIGNOSULFONATE)
CAS: 8061-51-6
RTECS: OI6174000
OSHA PEL N/K
ACGIH TLV: N/K
SYLESULFONIC ACID, SODIUM SALT; (SODIUM XYLENE SULFONATE)
CAS: 1330-72-7
RTECS: ZE5100000
OSHA PEL N/K
ACGIH TLV: N/K
SODIUM TOLYTRIAZOLE
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
POLYDIMETHYL SILOXANE; (POLYDIMETHYLSILOXANE EMULSION)
CAS: 9016-00-6
RTECS: TQ2690000
OSHA PEL N/K
ACGIH TLV: N/K
IS REQUIRED. RECOVER AS MUCH OF PURE PROD AS
RTECS: 9999999ZZ
ABSORBS MAY BE USED TO RECOVER ANY MATL THAT CANNOT
RTECS: 9999999ZZ
RESPONSIBLE FOR OPERATION OF YOUR FACILITY'S INDUS
RTECS: 9999999ZZ
SPILLS OR LEADS OF THIS PRODUCT TO THE INDUSTRIAL
RTECS: 9999999ZZ
HAZ WASTE. HOWEVER, SPILL/LEAK RESIDUALS
RTECS: 9999999ZZ
MFR'S LABS WILL ACCEPT ANY EMPTY DRUM
RTECS: 9999999ZZ
AND ASSUMING THE DRUM IS IN SATISFACTORY CONDITION.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH W/PLENTY OF SOAP & WATER. REPEAT WASHING. RINSE
FOR AT LEAST 15 MIN. CONSULT HLTH CARE PROFESSIONAL. IF CLTHG COMES
IN CONT W/PROD, CLTHG SHOULD BE REMOVED IMMED & SHOULD BE LAUNDERED
BEFOR E REUSE. EYES: FLUSH IMMED W/COPIOUS AMTS OF TAP WATER/NORM
SALINE FOR AT LEAST 15 MIN. TAKE TO HLTH CARE PROFESSIONAL. INHAL:
IF PERS EXPERIENCES NAUS, HDCH/DIZZ, IMMED MOVE TO FRESH AIR. (SUP
DAT)
Fire Fighting
Extinguishing Media:USE WATER SPRAY TO COOL NEARBY CONTAINERS AND
STRUCTURES EXPOSED TO FIRE.
Fire Fighting Procedures:NONE. WEAR NIOSH APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:INITIALLY MINIMIZE AREA AFFECTED BY
SPILL/LEAK. BLOCK ANY POTENTIAL RTES TO WATER SYS. ASSESS IMPACT ON
CONTAM ENVIRONS & MINIMIZE ANY ADVERSE EFTS. CONT YOUR MFR
REPRESENTATIVE IMMED. DETERMINE IF FE D, STATE, &/OR LOC RELEASE
NOTIFICATION(ING 6)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NORMAL PRECAUTIONS COMMON TO GOOD
MANUFACTURING PRACTICE SHOULD BE FOLLOWED IN HANDLING AND STORAGE.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NONE. USE NIOSH APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION IS EXPECTED TO BE
SATISFACTORY.
Protective Gloves:PVC-COATED, NON PERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: IF PERS HAS DFCLTY IN BRTHG/IS CYANOTIC, ADMIN OXYGEN
IF AVAIL. CALL MD. INGEST: DO NOT INDUCE VOMIT. RINSE MOUTH
W/COPIOUS AMTS OF WATER/MILK FIRST. THEN SLOWLY DILUTE STOM
CONTENTS W /6-8 OZ OF WATER. IN CASES WHERE PERS IS SEMICONSCIOUS,
DO NOT GIVE FLUIDS BY MOUTH. CONT MD IMMED.
Chemical Properties
Spec Gravity:1.08
Solubility in Water:COMPLETE
Appearance and Odor:MODERATE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, CONTAMINATION OF ANY KIND.
Hazardous Decomposition Products:FIRE MAY LIBERATE CARBON MONOXIDE &
DIOXIDE, OXIDES OF SILICON, SULFUR & SODIUM, HCN POSSIBLE IN
REDUCING ATMOSPHERES.
Disposal
Waste Disposal Methods:FOLLOW ALL FED, STATE, & LOC REGS GOVERNING DISP
OF WASTE MATLS. DETERMINE IF WASTE CONTAINING THIS PROD CAN BE
HANDLED BY AVAIL INDUS EFFLUENT SYS/OTHER ON-SITE WASTE MANAGEMENT.
THIS PROD IS NOT SPE CIFICALLY LISTED IN 40 CFR 261 AS RCRA (ING
10)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.