CGXNV - INTERSHIELD PRORECO PART B
- MSDS: CGXNV
- Manufacturer: COURTAULDS COATINGS INC INTERNATIONAL
- Product Name: INTERSHIELD PRORECO PART B
- National Stock Number: 8010-01-024-7001
Product Identification
Product ID:INTERSHIELD PRORECO PART B
MSDS Date:11/11/1996
FSC:8010
NIIN:01-024-7001
Kit Part:Y
MSDS Number: CGXNV
Responsible Party
HOUSTON, TX 77091
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 800-854-6813
Cage: 50411
Contractor
Telephone: 713-684-1244
Cage: 028S6
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL NOT RELEVANT
ACGIH TLV: NOT RELEVANT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT. SKIN: IRRIT. INHAL:
NOSE/THROAT IRRIT. INGEST: IRRIT OF MOUTH, STOMACH TISSUES AND
DIGESTIVE TRACT.
First Aid
First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: FLUSH W/WATER, THEN
WASH W/SOAP & WATER. REMOVE CONTAM CLOTHES/SHOES. WASH BEFORE
REUSE. INHAL: REMOVE TO FRESH AIR. INGEST: DONT INDUCE VOMIT. KEEP
AT REST. I N ALL CASES, GET MED AID.
Fire Fighting
Flash Point:172F,78C
Lower Limits:1.5
Extinguishing Media:FOAM, CARBON DIOXIDE AND DRY CHEMICAL.
Fire Fighting Procedures:REMOVE FROM IGNITS. CLOSED CONTAINERS MAY
EXPLODE IN HIGH HEAT. IF NO ELECTRICITY OR WATER SPRAY, FOG NOZZLE
IS PREFERRED TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:CONTAIN SPILLED LIQUID W/SAND OR EARTH. DONT
USE COMBUSTION MATERIALS SUCH AS SAWDUST. ABSORB W/INERT MATERIAL
(DRY SAND, EARTH) & PLACE IN CHEMICAL WASTE CONTAINER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN COOL,
WELL VENTED AREA. AWAY FROM INCOMPATIBLE MATERIALS. KEEP FROM
IGNITS AND DIRECT SUNLIGHT.
Other Precautions:LOOSEN CLOSURE CAUTIOUSLY BEFORE OPENING. GROUND/BOND
CONTAINERS WHEN TRANSFERRING MATERIALS. EMPTY CONTAINERS MAY RETAIN
HAZARDOUS PROPERTIES. FOLLOW ALL MSDS LABEL WARNINGS EVEN AFTER
CONTAINER IS E MPTY.
Exposure Controls
Respiratory Protection:USE A NIOSH/MSHA OR OTHER HUMAN SERVICES
APPROVED RESPIRATOR TO REMOVE PARTICULATES (AND VAPORS IF THERE IS
AN OVEREXPOSURE TO VAPORS GENERATED DURING THE PROCESSING OF THIS
PRODUCT).
Ventilation:SUFFICIENT VENT IN VOLUME & PATTERN TO KEEP TLV BELOW
LIMITS. REMOVE VOLATILES PRODUCED DURING CURE/DECOMP PRODUCTS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/CHEM GOGGLES/FACE SHIELD
Other Protective Equipment:USE BODY PROTECTION TO AVOID CONTACT WITH
PRODUCT AS NEEDED.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:284F,140C
Vapor Density:>AIR
Spec Gravity:1.54
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:FUMES MAY PRODUCE OXIDES OF CARBON.
MAY PRODUCE HAZARDOUS FUMES WHEN HEATED TO HAZARDOUS DECOMPOSITION
AS IN WELDING.
Disposal
Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
REGULATIONS. DONT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.