Product ID:THINNER EPOXY 5875
MSDS Date:11/11/1996
FSC:8010
NIIN:01-200-2637
MSDS Number: CGXPT

COURTAULDS COATINGS, INC. INTERNATIONAL

6001 ANTOINE DRIVE
HOUSTON, TX 77091
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-854-6813

Cage: 50411

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 713-684-1244

Cage: 028S6

BUTAN-2-ONE (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 50-100%

OSHA PEL 200 PPM/STEL 300

ACGIH TLV: 200 PPM/STEL 300

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

1-METHOXYPROPAN-2-OL

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 25-50%

OSHA PEL 100 PPM/STEL 150

ACGIH TLV: 100 PPM/STEL 150

4-METHYLPENTAN-2-ONE (SA 313) (CERCLA)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 10-25%

OSHA PEL 100 PPM/STEL 75

ACGIH TLV: 50 PPM/STEL 75

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT. SKIN: IRRIT, ORGAN DAMAGE.
INHAL: LUNG/NOSE/THROAT IRRIT, HARMFUL, BRAIN/NS DAMAGE, DIZZY,
HEADACHE, NAUSEA. INGEST: FATAL, ORGAN DAMAGE.

First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: FLUSH W/WATER, THEN
WASH W/SOAP & WATER. REMOVE CONTAM CLOTHES/SHOES, WASH BEFORE
REUSE. INHAL: REMOVE TO FRESH AIR. INGEST: DONT INDUCE VOMIT. KEEP
AT REST. I N ALL CASES, GET MED AID.

Flash Point:53.0F,11.7C
Lower Limits:1.6
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:KEEP FROM HEAT & ELECTRICAL EQUIPMENT. CLOSED
CONTAINERS MAY EXPLODE IN HIGH HEAT. IF NO ELECTRICITY WATER
SPRAY/FOG NOZZLE PREFERRED TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
BE TOXIC.

Spill Release Procedures:CONTAIN SPILL W/SAND OR EARTH. DONT USE
COMBUSTIBLE MATERIAL SUCH AS SAWDUST. ABSORB SPILL W/INERT MATERIAL
(SAND/EARTH). PLACE IN CHEMICAL WASTE CONTAINER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN COOL,
WELL VENTED AREA AWAY FROM INCOMPATIBLE MATERIALS, IGNIT SOURCES &
DIRECT SUNLIGHT.
Other Precautions:LOOSEN CAUTIOUSLY BEFORE OPENING. GROUND/BOND
CONTAINERS WHEN TRANSFERRING MATERIALS. EMPTY CONTAINERS MAY RETAIN
HAZARDOUS PROPERTIES. FOLLOW ALL MSDS & LABEL WARNINGS EVEN AFTER
CONTAINERS ARE EMPTY .

Respiratory Protection:USE NIOSH/MSHA OR OTHER HUMAN SERVICES APPROVED
RESPIRATOR TO REMOVE PARTICLES (AND VAPORS IF THERE IS OVEREXPOSURE
TO VAPORS GENERATED DURING PROCESSING OF THIS PRODUCT).
Ventilation:SUFFICIENT VENT IN VOLUME & PATTERN TO KEEP TLV BELOW
LIMITS. REMOVE VOLATILES PRODUCED DURING CURE & DECOMP PRODUCTS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/CHEM GOGGLES/FACE SHIELD
Other Protective Equipment:USE BODY PROTECTION TO AVOID CONTACT WITH
PRODUCT AS NEEDED.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:171F,77C
Vapor Density:>AIR
Spec Gravity:.836
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING. FUMES MAY PRODUCE OXIDES OF
CARBON.

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
REGULATIONS. DONT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.