CHCMW - 05004329, THORNEL CARBON FIBER T-50 PAN BASED(SUPDAT)
- MSDS: CHCMW
- Manufacturer: AMOCO PERFORMANCE PRODUCTS INC
- Product Name: 05004329, THORNEL CARBON FIBER T-50 PAN BASED(SUPDAT)
- National Stock Number: 9390-00N085293
Product Identification
Product ID:05004329, THORNEL CARBON FIBER T-50 PAN BASED(SUPDAT)
MSDS Date:12/28/1988
FSC:9390
NIIN:00N085293
MSDS Number: CHCMW
Responsible Party
CHICAGO, IL 60601
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 312-856-3340
Preparer: R.G. FARMER
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
CARBON; (CARBON FIBER, POLYACRYLONITRILE BASED)
CAS: 7440-44-0
RTECS: FF5250100
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
FIBERS ARE USED/HNDLD SHOULD BE PROPERLY
RTECS: 9999999ZZ
OR FILAMENTS.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:AIRBORNE FIBERS AND PARTICLES
CAUSE MILD IRRITATION. SKIN:NO SIGNIFICANT IRRITATION EXPECTED
OTHER THAN POSSIBLE MECHANICAL IRRITATION. INHALATION:NONE EXPECTED
UNDER NORMAL CONDITIONS OF USE. ING ESTION:EXPECTED TO BE
RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES, GET MEDICAL ATTENTION IF IRRITATION
P ERSISTS. SKIN:WASH EXPOSED SKIN W/SOAP & WATER.
Fire Fighting
Extinguishing Media:AGENTS APPROVED FOR CLASS A HAZARDS (E.G.,
HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:INCIN MAY GENERATE AIRBORNE FIBERS WHICH
MAY CAUSE ELEC MALFUNCTIONS. CARBON FIBERS ARE ELECTRICALLY
CONDUCTIVE & MAY CAUSE SHORT CIRCUITS WHICH RSLT IN(SUPDAT)
Accidental Release
Spill Release Procedures:CONTAIN & REMOVE & MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.
PROCESSES WHICH CAN CAUSE EXCESSIVE FILAMENT BREAKAGE, SUCH AS
CHOPPING, INCREASE POTENTIAL FOR SKIN IRRITATION.
Other Precautions:HANDLING &/OR PROCESSING OF THIS MATERIAL MAY
GENERATE AIRBORNE FIBERS & PARTICLES WHICH CAN CAUSE MECHANICAL
IRRITATION OF EYES, SKIN, NOSE & THROAT.
Exposure Controls
Respiratory Protection:IF DUST IS GENERATED & VENTILATION IS
INADEQUATE, USE NIOSH APPROVED RESPIRATOR WHICH WILL PROTECT
AGAINST DUST.
Ventilation:ADEQUATE LOCAL EXHAUST VENTILATION SHOULD BE EMPLOYED TO
PREVENT DUSTY CONDITIONS, AS W/ANY DUST GENERATING MATERIAL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . PROT SKIN CREAM/BODY TALCUM MAY BE HELPFUL AGAINST DUST.
(SUPDAT)
Work Hygienic Practices:GOOD INDUS HYGIENE PRACTICES SHOULD BE EMPLOYED
TO PVNT DUSTY CNDTNS, AS W/ANY DUST GENERATING MATL. IF IRRIT
(SUPDAT)
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:CONTINUOUS FILAMENT. OTHER PROT EQUIP:LONG
SLEEVE GARMENTS W/TIGHT-FITTING CUFFS. HYGIENE PRACT:OCCURS, WASH
SKIN W/SOAP & WATER & CHANGE CLTHG. KEEP CLTHG CLEAN & DRY. EXPLO
HAZ:DMG TO/MALFUNCTIONING OF ELEC EQUIP. ALL FORMS OF ELEC EQUIP,
ENCLOSURES & CIRCUITS IN/NEAR AREAS WHERE (ING 2)
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:6512F,3600C
Spec Gravity:2
Solubility in Water:NEGLIGIBLE; <0.1%.
Appearance and Odor:BLACK FIBERS; ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE IDENTIFIED.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DISP MUST BE I/A/W APPLIC FED, STATE/LOC REGS.
DO NOT INCIN. BURIAL AT PERMITTED LANDFILL IS REC. DISCARDED MATLS
ARE DFCLT TO INCIN. THEY SHOULD BE BAGGED/CONTAINERIZED & BURIED IN
LANDFILL WHERE PER MITTED UNDER FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.