CHDYN - RTV SILICONE SEALANT, RTV106

  • MSDS: CHDYN
  • Manufacturer: GE SILICONES
  • Product Name: RTV SILICONE SEALANT, RTV106
  • National Stock Number: 8030-01-287-8356
Product Identification

Product ID:RTV SILICONE SEALANT, RTV106
MSDS Date:10/14/1996
FSC:8030
NIIN:01-287-8356
MSDS Number: CHDYN

Responsible Party
GE SILICONES
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: CE HANNIGAN

Cage: GESIL

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

1800 MG/KG

CAS: 108-24-7

RTECS: AK1925000

Fraction By Weight: <1%

OSHA PEL 5 PPM

ACGIH TLV: 5 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


DI-TERT-BUTOXYDIACETOXYSILANE; (DI-T-BUTOXYDIACETOXYSILANE)

CAS: 13170-23-5

Fraction By Weight: <1%

OSHA PEL N/K

ACGIH TLV: N/K


SILANE, METHYLTRIACETOXY-; (METHYLTRIACETOXYSILANE) LD50

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM (MFR)

ACGIH TLV: 10 PPM (MFR)


STANNANE, DIBUTYLBIS(LAUROYLOXY)-; (DIBUTYLTIN DILAURATE)

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: <1%

OSHA PEL 0.1 MG SN/M3 SKIN

ACGIH TLV: 0.1 MG SN/M3


3,310 MG/KG

CAS: 64-19-7

RTECS: AF1225000

Fraction By Weight: <1%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM/15 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


POLYDIMETHYLSILOXANE; (POLYDIMETHYLSILOXANE SILANOL/STPD)

CAS: 70131-67-8

Fraction By Weight: 60-80%

OSHA PEL N/K

ACGIH TLV: N/K


>40

CAS: 68554-67-6

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K


FUMED SILICA; (TETRAMER TREATED FUMED SILICA)

CAS: 68583-49-3

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K


IRON (III) OXIDE; (RED IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 1-5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG(FE)/M3 FUME, B2

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: MAY BE HARMFUL IF
SWALLOWED. SKIN: UNCURED PROD CONT WILL IRRITATE LIPS, GUMS &
TONGUE; MAY IRRITATE SKIN. INHAL: CAUSES IRRIT OF MOUTH, NOSE &
THROAT. APPLIES ONLY IN UNCURED STATE. EY ES: UNCURED PROD CONT
IRRITATES. TARGETORGAN EFTS: NONE KNOWN. THIS PROD CONTAINS
METHYLPOLYSILOXANES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: WHICH CAN GENERATE FORMALDEHYDE AT
APPROX 300F (150C) & ABOVE, IN ATMS WHICH CONTAIN OXYGEN.
FORMALDEHYDE IS A SKIN & RESP SENSITIZER, EYE & THROAT IRRITANT,
ACUTE TOXICANT, & POTENTIAL CANC ER HAZ. AN MSDS FOR FORMALDEHYDE
IS AVAIL FROM GE SILICONES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INGESTION: RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN: REMOVE
COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL, BEFORE WASHING WITH
DETERGENT AND WATER. INHALATION: MOVE PERSON TO FRESH AIR. EYES:
IMMEDIATE LY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. NOTE TO MD: NONE
KNOWN.

Fire Fighting

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:NONE KNOWN. WEAR NIOSH APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN INERT MATERIAL AND
PUT IN CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH DETERGENT
AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE
EQUIPMENT AS SPECIFIED IN PROTECTIVE EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES. CAUTION! REMOVE CONTACT LENSES
BEFORE USING SEALANT.
Other Precautions:DO NOT HANDLE LENSES UNTIL ALL SEALANT HAS BEEN
CLEANED FROM FINGERTIPS, NAILS & CUTICLES. RESIDUAL SEALANT MAY
REMAIN ON FINGERS FOR SEVERAL DAYS & TRANSFER TO LENSES & CAUSE SEV
EYE IRRIT. PROD RELE ASES ACETIC ACID DURING (SUP DAT)

Exposure Controls

Respiratory Protection:USE IN WELL-VENTILATED AREA. USE NIOSH APPROVED
RESPIRATORY PROTECTION IF TLV IS EXCEEDED OR OVEREXPOSURE IS
LIKELY.
Ventilation:USE IN WELL-VENTILATED AREA.
Protective Gloves:CLOTH GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE KNOWN. EMERGENCY EYEWASH AND DELUGE
SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: APPLICATION & CURING. USE MECH VENT TO STAY BELOW TLV OF 10
PPM ACETIC ACID. UNCURED PROD CONT IRRITATES EYES & MAY IRRITATE
SKIN. USE IN WELL-VENTILATED AREA TO PVNT IRRIT BY VAPS.

Chemical Properties

Spec Gravity:1.07 (H*2O=1)
VOC Pounds/Gallon:6
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE @ 20C
Appearance and Odor:RED SOLID WITH ACETIC ACID ODOR
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, FORMALDEHYDE.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.