CHHXS - PRODUCT:1207

Product Identification

Product ID:PRODUCT:1207
MSDS Date:06/11/1991
FSC:6850
NIIN:01-413-6517
MSDS Number: CHHXS

Responsible Party
J AND M LABORATORIES INC
1717 ROWAN ST
LOUISVILLE, KY 40203
US

Emergency Phone: 502-585-3176/FAX 502-585-3216

Info Phone: 502-585-3176/FAX 502-585-3216

Cage: 01VT9

Contractor
J AND M LABORATORIES, INC.
LOUISEVILLE, KY 40203 US

Telephone: 800-473-6173/502-585-3176

Cage: 01VT9

Ingredients

NO SPECIFIC CHEM(S)GIVEN BY MSDS,JUST CHEMS(INGREDS

RTECS: 9999999ZZ

Fraction By Weight: NA


2-PROPENOIC ACID

RTECS: 9999999ZZ


SODIUM PHOSPHINATE

CAS: 10039-56-2

RTECS: SZ5640000


COBALT SULFATE

CAS: 10124-43-3

RTECS: GG3100000

OSHA PEL 0.05 MG C0/M3

ACGIH TLV: 0.05 MG C0/M3


POLYMALEIC ACID


SODIUM BISULFITE (SASA III) (CERCLA)

CAS: 7631-90-5

RTECS: VZ2000000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3; 9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SODIUM GLYCONATE

RTECS: 9999999ZZ


TRISODIUM NITRILOTRIACETATE

CAS: 5064-31-3

RTECS: MB8400000


SODIUM HYDROXIDE (CERCLA)

CAS: 1310-73-2

RTECS: WB4900000

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POTASSIUM HYDROXIDE (CERCLA)

CAS: 1310-58-3

RTECS: TT2100000

OSHA PEL C 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


1-HYDROXYETHYLIDENE-1,1-DIPHOSPHONIC ACID

CAS: 7414-83-7

RTECS: SZ8562240

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:PER MSDS:NOT LISTED IN ANY OSHA STD,SEC
1910.1200 SOURCES AS CARC.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH W/PLENTY OF SOAP/WATER.REPEAT WASHING.RINSE EXPO
AREA FOR @LEAST 15MINS.CONSULT HEALTH CARE PROF.CLOTH CONTACT PROD
REMOVE IMMED.EYE:FLUSH IMMED W/COPIOUS AMTS OF TAP WATER/NORMAL
SALINE(MIN )OF 15MINS.TAKE EXPO PERSON TO HEALTH CARE
PROF.INHAL:NAU,HEAD,DIZZ IMMED MOVE TO FRESH AIR.DIFFI BREATH/IS
CYANOTIC ADMIN OXY IF AVAI.CALL PHYSICIAN.INGEST:DONT INDUCE
VOMIT.RINSE MOUTH W/(SUPPLEM)

Fire Fighting

Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Fire Fighting Procedures:FOLLOW NORMAL FIREFIGHTING PROCEDURES.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:MIN AREA.BLCOK POT ROUTES TO H2O SYST.ASSESS
IMPACT ON COTNAM ENVIRO/MIN ANY ADVERSE EFFECTS.CONTACT J&M REP
IMMED.DETERMINE IF FED/STATE/LOC RELEASE NOTIFICATION
REQUIRE.RECOVER AS MUCH OF PURE PROD AS POSSIBLE INTO APPRO
CNTNR.CLAY,SOIL,COMMER(SUP)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:J&M WILL ACCEPT EMPTY DRM ASSUMING NO
FOREIGN MATTER HAS BEEN PLACED IN THEM & IN SAT CONDITION.FOLLOW
NORMAL PROCEDURES.
Other Precautions:NONE NECESSARY.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNLESS LARGE AMTS ARE HANDLED IN
EMERGENCY.IN SUCH SITUATION GAS MASK SHOULD BE WORN.
Ventilation:LOCAL EXHAUST SHOULD BE ADEQUATE.
Protective Gloves:RUBBER GLOVES REQUIRED.
Eye Protection:PROTECTIVE GOGGLES REQUIRED.
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:LAUNDERED CONTAM CLOTHING BEF REUSE.
Supplemental Safety and Health
1STAID:COPIOUS AMTS OF H2O/MILK 1ST;THEN SLOWLY DIL STOMACH W/6-8OZ
H2O.VICTIM SEMICONSC,COMATOSE,CONVULS DONT GIVE FLUIDS BY
MOUTH.CONTACT DR IMMED. SPILL:AVAI ABSORBENTS MAY BE USED TO
RECOVER ANY M ATL NOT READILY RECOVER AS PURE PROD.CONTACT RESPONS
PERSON OF FAC INDUST SEWER SYS PRIOR TO FLUSH TO SEWR

Chemical Properties

HCC:B1
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:1.250-1.320
pH:13.0
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR AMBER, STRONG ODOR
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS;ALUMINUM.
Stability Condition to Avoid:EXCESSIVE HEAT;CONTAMINATION OF ANY KIND.
Hazardous Decomposition Products:THERM DECOMPO/BURNING MAY PRODUCE
CO2,CO AND PHOSPHORUS OXIDES.CONTACT W/ALUMINUM MAY PRODUCE
HYDROGEN GAS.

Disposal

Waste Disposal Methods:FOLLOW ALL FED/STATE/LOC REGS GOVERNING DISPO OF
WASTE MATLS.DETERMINED IF WASTE W/PROD CAN BE HNDL BY AVAI
INDUSTRIAL EFFLUENT SYS/OTHER ONSITE WASTE MNGMT.PROD NOT SPEC
LISTED IN 40CFR261 RCRA HAZ W ASTE.SPILL/LEAK RESIDUE MAY MEET
CHARACTER OF ACT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.