CHLGW - FW-1,MET80,175-58&60,720R,916-(46,46Q2,46Q3B,46Q3T),OTH PREC

  • MSDS: CHLGW
  • Manufacturer: ABEX CORP FRICTION PRODUCTS GROUP
  • Product Name: FW-1,MET80,175-58&60,720R,916-(46,46Q2,46Q3B,46Q3T),OTH PREC
  • National Stock Number: 2530-00D007527
Product Identification

Product ID:FW-1,MET80,175-58&60,720R,916-(46,46Q2,46Q3B,46Q3T),OTH PREC
MSDS Date:12/01/1990
FSC:2530
NIIN:00D007527
MSDS Number: CHLGW

Responsible Party
ABEX CORP FRICTION PRODUCTS GROUP
2410 PAPER MILL RD
WINCHESTER, VA 22601-3250
US

Emergency Phone: 703-662-3842

Info Phone: 703-662-3871/703-665-2270

Preparer: M.K. LEUNG

Cage: 85117

Contractor
NAPA
UNKNOW INDIANAPOLIS, IN 46241 US

Telephone: 317-244-7241

Cage: 0NBN5

Ingredients

SILICA,SILICATES, TRIPOLI,TALC (NON-FIBEROUS FORM)


CARBON BLACK, GRAPHITE, OTHERS


PHENOLIC AND CASHEW AND ELASTOMER COMPOUNDS


WOOD FLOUR AND OTHER FILLERS


METALS AND THEIR OXIDES-IRON, ZINC, ALUMINUM, MAGNESIUM,

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SOME PERSONS MAY BE SENSITIVE TO
CASHEW RESINS & DEVELOP DERM-TYPE PROBLEMS.DUST OF
SILICA,GRAPHITE,CARBON BLACK& COAL CAN PRODUCE PENUMOCONIOSIS &
OTHER LUNG DMG.METAL DUSTS CAN BE IRRITS OF EYES & U PPER RESP
SYS.THERES LITTLE EVIDENCE OFCHRONIC INDUST POIS FRM FE,AL,ZN
DUSTS.
Explanation of Carcinogenicity:PER
MSDS:CARCINOGENICITY:NO;NTP/IARC/OSHA:NO.
Effects of Overexposure:CASHEW RESINS-SKIN ERUPTIONS SIMILAR IN
APPEARANCE TO POIS IVY.PNEUMOCONIOSIS-COUGH,WHEEZ,SHORT OF
BREATH,IMPAIR PULM FUNCTION.DUSTS IN EYE MAY CAUSE IRRIT.GI DISTURB
POSSIBLE FRM INGEST.

First Aid

First Aid:SHOULD NOT BE NECESSARY FROM REASONABLE HANDLING OF THIS
PRODUCT.

Fire Fighting

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER, (CLASS A,B,OR C).
Fire Fighting Procedures:POSITIVE PRESSURE SCBA SHOULD BE
USED.PERSONNEL NOT HAVING SUITABLE RESP PROT SHOULD LEAVE AREA TO
PREVENT SIGNIF EXPO TO TOXIC COMBUST GASES FROM ANY SOURCE.

Accidental Release

Spill Release Procedures:GRINDING/DRILLING/MILLING/ETC CAN RESULT IN
RELEASE OF AIRBONRE DUST.MEASURES AS OUTLINES IN MSDS SHOULD BE
FOLLOWED IF THIS OCCURS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PRE-EMPLOYMENT SCREENING FOR
ALLERGIES/HISORIES OF SKIN SENS MAY BE BENEF IN DETERMING PERSONS
SENS TO CASHEW MATLS.
Other
Precautions:ID:916-267,979-(34,35),1001-49,1101-8,3042-(11,18,43),3
070-41,3075-4,ABEX,ABB(255,287,2000,2004,2014,2015,2017,2021,2028,2
038,2040,2045,2055)COM,MIAX,WED,MET,MI,203,GRITRON
1,EES700,701,EIS(CB9466,CB9 477,ME87,ME88)NRP-12049,BSILM,NRS21080

Exposure Controls

Respiratory Protection:NIOSH APPROVED FOR PNEUMOCONIOSIS AND DUST W/TLV
NOT LESS THAN 0.05MG/M3.
Ventilation:LOC EXHAU:FOR DUST EXPO EXCEEDING TLV.MECH(GEN):NOT
RECOMMENDED FOR DUST EXPO.OTHER:BARRIER CREAMS FOR PERSONS W/(SUP)
Protective Gloves:RECOMMENDED
Eye Protection:SHOULDNT BE NEEDED FOR NORM HDNLG(SUPPL)
Other Protective Equipment:RECOMMENED IN DUSTRY ATMOSPHERE.MAY BE
REQUIRED UNDER OSHA LEAD STD DEPENDING UPOLN EXPO LEVELS.
Work Hygienic Practices:EMPLOYEES SHOULD BE PROPERLY INSTRUCTED IN USE
OF CNTRL MEASURES AS INDICATED WHEN THERES NEED FOR IT.IF DUST
(SUPPLEM)
Supplemental Safety and Health
VENTIL:SKIN SENS TO CASHEW RESINS/FIBER GLASS. EYE PROT:GOOD PRAC WHERE
DUST PROPELLED BY GRIND/DRILL ACTIVITIES. WORK HYG PRA:FROM PROD
PRODUCED UNNECESSARY EXPO SHOULD BE AVOIDED BY USING VAC IN PLA CE
OF DRY BROOMING.USE WET METHOD FOR CLEANING FOR OTHER
SURFS.PROPER/ADEQU PERS HYG SHOULD BE PRACTICE BY EXPO WORKERS.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:3-4
pH:NP
Viscosity:NP
Evaporation Rate & Reference:0
Solubility in Water:NO
Appearance and Odor:SOLID, BROWNISH GREY COLOR, FRICTION MATERIAL ODOR
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION WILL CREATE
CARBON MONOXIDE AND DIOXIDE.

Disposal

Waste Disposal Methods:HAZARDOUS INGRES:40CFR PART 261, 262, &
APPLICABLE STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.