CHMDB - STANNANE, DIBUTYL BIS (1-OXODODECYL); SILICONE CATALYST

  • MSDS: CHMDB
  • Manufacturer: GENERAL ELECTRIC COMPANY
  • Product Name: STANNANE, DIBUTYL BIS (1-OXODODECYL); SILICONE CATALYST
  • National Stock Number: 9320-00-995-3389
Product Identification

Product ID:STANNANE, DIBUTYL BIS (1-OXODODECYL); SILICONE CATALYST
MSDS Date:10/23/1996
FSC:9320
NIIN:00-995-3389
Kit Part:Y
MSDS Number: CHMDB

Responsible Party
GENERAL ELECTRIC COMPANY
3135 EASTON TURNPIKE
FAIRFIELD, CT 06431
US

Emergency Phone: 203-254-5400

Info Phone: 203-254-5400

Preparer: C.E. HANNIGAN

Cage: 0D426

Contractor
GENERAL ELECTRIC COMPANY
FAIRFIELD, CT 06431 US

Telephone: 203-254-5400

Cage: 0D426

Ingredients

DIBUTYL TIN DILAURATE

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: 80-99%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

Hazards

Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE; INGESTION: HARMFUL IF
SWALLOWED, MAY BE FATAL IF SWALLOWED. SKIN CONTACT: CAUSES MODERATE
SKIN IRRITATION. INHALATION: NONE KNWON. EYE CONTACT: CAUSES SEVERE
EYE IRRITATION. CHRONIC; CENTRAL NE RVOUS SYSTEM DAMAGE. CUMLATIVE
SYSTEMATIC TOXICITY.
Medical Cond Aggravated by Exposure:CENTRAL NERVOUS SYSTEM DISORDERS

First Aid

First Aid:INGESTION: IF SWALLOWED INDUCE VOMITING IMMEDIATELY BY GIVING
2 GLASSES OF WATER & STICKING FINGERS DOWN THROAT; NEVER GIVE
ANYTHING TO AN UNCONSCIOUS PERSON. GET MED ATTENTION. SKIN: REMOVE
CONTAMINA TED CLOTHING AND LAUNDER BEFORE REUSE. WASH WITH SOAP &
WATER. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION:
NONE KNOWN. EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER 15 MIN. GET
MED AID.

Fire Fighting

Flash Point Method:COC
Flash Point:455F,235C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA
Fire Fighting Procedures:NONE KNOWN. WEAR RESPIRATORY PROTECTION IF IN
A CONFINED AREA.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WEAR PROPER PROTECTIVE
EQUIPMENT AS SPECIFIED IN PROTECTIVE EQUIPMENT SECTION. WARN OTHER
WORKERS OF SPILL.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES. WASH HANDS BEFORE EATING AND
SMOKING. CAUTION!

Exposure Controls

Respiratory Protection:USE IN A WELL VENTILATED AREA.
Ventilation:USE IN A WELL VENTILATED AREA.
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES, MONOGOGGLES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:SHOWERS. EYEWASH STATIONS.
Supplemental Safety and Health
KEY1:N1

Chemical Properties

HCC:N1
Boiling Pt:=204.4C, 400.F
Melt/Freeze Pt:M.P/F.P Text:65.0F,18.3C
Vapor Pres:NEGL
Vapor Density:21.8
Spec Gravity:1.035 (WATER=1)
VOC Pounds/Gallon:27
Evaporation Rate & Reference:<1 (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW LIQUID, MILD ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, TIN
FUMES

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. INCINERATION RECOMMENDED IN
APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.