CHMDR - ALVANIA GREASE 3, 71013
- MSDS: CHMDR
- Manufacturer: SHELL OIL CO
- Product Name: ALVANIA GREASE 3, 71013
- National Stock Number: 9150-01-046-6636
Product Identification
Product ID:ALVANIA GREASE 3, 71013
MSDS Date:01/29/1996
FSC:9150
NIIN:01-046-6636
MSDS Number: CHMDR
Responsible Party
US
Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)
Info Phone: 713-241-2252
Cage: SHELO
Contractor
Telephone: 800-231-6950
Cage: 54527
Ingredients
HIGHLY REFINED LUBRICATING OILS MAY CONTAIN INGREDIENTS
RTECS: 9999999ZZ
Fraction By Weight: 80-85%
OSHA PEL N/K
ACGIH TLV: N/K
DISTILLATES, ACID-TREATED HEAVY NAPHTHENIC
CAS: 64742-18-3
RTECS: PY8032000
Fraction By Weight: 60-65%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE),
CAS: 64742-52-5
RTECS: PY8035001
OSHA PEL N/K
ACGIH TLV: N/K
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-54-7
RTECS: PY8035501
OSHA PEL N/K
ACGIH TLV: N/K
LITHIUM 12 HYDROXYSTEARATE
CAS: 7620-77-1
Fraction By Weight: 15%
OSHA PEL N/K
ACGIH TLV: N/K
ADDITIVES CONTAINING INGREDIENT 7
Fraction By Weight: <3%
OSHA PEL N/K
ACGIH TLV: N/K
NITROUS ACID, SODIUM SALT; (SODIUM NITRITE) (CERCLA)
CAS: 7632-00-0
RTECS: RA1225000
Fraction By Weight: <1%
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
SLIGHTLY TOX IF SWALLOWED. OTHER EFTS
RTECS: 9999999ZZ
IARC, NTP OR OSHA. SPECIFIC PROD HAS NOT BEEN TESTED
RTECS: 9999999ZZ
GREASES GENERALLY CONSIDERED TO BE LOW ORDER OF ACUTE
RTECS: 9999999ZZ
HNDLG PROCS & SFTY PRECS IN MSDS SHOULD BE FOLLOWED
RTECS: 9999999ZZ
SHOULD NOT RSLT IN OVEREXP TO SODIUM NITRITE.
RTECS: 9999999ZZ
ALTER BLOOD (HEMOGLOBIN) TO REDUCE OXYGEN CARRYING
RTECS: 9999999ZZ
BREATH, PALPITATIONS, COMA &/OR DEATH MAY OCCUR.
RTECS: 9999999ZZ
REMOVE VICTIM TO FRESH AIR & PROVIDE
RTECS: 9999999ZZ
NOT INDUCE VOMIT. IN GEN, NO TREATMENT IS NECESSARY
RTECS: 9999999ZZ
IN GENERAL,
RTECS: 9999999ZZ
VOLATILITY PRODUCTS, IE, MOST OILS & GREASES.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: LUBRICATING GREASES ARE
GENERALLY CONSIDERED NO MORE THAN MINIMALLY IRRITATING TO EYES.
SKIN CONTACT: PRLNGD/RPTD CONTACT MAY CAUSE VARIOUS SKIN DISORDERS
SUCH AS DERM, FOLLICULITIS OR OI L ACNE. RELEASE DURING HIGH PRESS
USAGEMAY RSLT IN INJECTION OF OIL INTO SKIN CAUSING LOCAL NECROSIS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: EVIDENCED BY DELAYED ONSET OF PAIN &
TISSUE DMG A FEW HRS FOLLOWING INJECTION. INHAL: NOT EXPECTED TO BE
RELEVANT ROUTE OF EXPOS, HOWEVER, UNDER HIGH TEMP CNDTNS, VAPS
IRRITATING TO NOSE, TH ROAT & UPPER RESP TRACT MAY BE PRODUCED.
INGEST: LUBRICATING GREASES ARE GENERALLY CONSIDERED NO MORE THAN
(ING 8)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MIN WHILE HOLDING EYELIDS
OPEN. GET MED ATTN. SKIN: REMOVE CONTAM CLTHG & WIPE EXCESS OFF.
WASH W/SOAP & WATER OR WATERLESS HAND CLEANER FOLLOWED BY SOAP &
WATER. D O NOT REUSE CLTHG UNTIL THOROUGHLY CLEANED. IF IRRIT
PERSISTS, GET MED ATTN. IF MATL IS INJECTED UNDER SKIN, GET MED
ATTN PROMPTLY TO PREVENT SERIOUS DAMAGE; DO NOT WAIT FOR SYMPS TO
DEVELOP. (ING 15)
Fire Fighting
Flash Point Method:PMCC
Flash Point:415F,213C
Extinguishing Media:USE WATER FOG, DRY CHEMICAL OR CARBON DIOXIDE. DO
NOT USE A DIRECT STREAM OF WATER. PRODUCT WILL FLOAT & CAN (SUPDAT)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . COOL FIRE EXPOSED CONTAINERS SURROUNDING EQUIPMENT AND
STRUCTRUES WITH WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SCOOP UP EXCESS GREASE. CLEAN AREA WITH
APPROPRIATE CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. WASH W/SOAP & WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER
CONTAMINATED CLTHG BEFORE REUSE. PROPERLY DISPOSE OF CONTAM LEATHER
ARTICLES, INCLUDING SHOES, THAT CANNOT BE DECONTAMINATED.
Exposure Controls
Respiratory Protection:NOT ORDINARILY REQUIRED. USE NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:OIL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . USE
OTHER CLOTHING AS NEEDED TO MINIMIZE SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MP: 360F,182C (DROP POINT). EXTING MEDIA: BE REIGNITED ON SURFACE OF
WATER. HAZ DECOMP PRODS: PARTICULATES & GASES WILL EVOLVE WHEN THIS
MATL UNDERGOES PYROLYSIS OR COMBUSTION. CARBON MONOXIDE & UNIDE
NTIFIED ORGANIC CMPDS MAY BE FORMED UPON COMBUSTION.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER, SMOOTH GREASE; SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT AND OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DEOMP PRODS ARE HIGHLY
DEPENDENT ON COMBUSTION CONDITIONS. COMPLEX MIXTURE OF AIRBORNE
SOLID, LIQUID (SUPDAT)
Disposal
Waste Disposal Methods:IF THIS PRODUCT BECOMES A WASTE, IT WOULD NOT BE
A HAZARDOUS WASTE BY RCRA CRITERIA (40 CFR 261). PLACE IN AN
APPROPRIATE DISPOSAL FACILITY IN COMPLIANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.