CHNMB - OM FINISHING STAINS, 401-415

  • MSDS: CHNMB
  • Manufacturer: MASTER PRODUCTS
  • Product Name: OM FINISHING STAINS, 401-415
  • National Stock Number: 8010-00N056066
Product Identification

Product ID:OM FINISHING STAINS, 401-415
MSDS Date:09/15/1995
FSC:8010
NIIN:00N056066
MSDS Number: CHNMB

Responsible Party
MASTER PRODUCTS
1900 ALBANY PLACE SOUTH
ORANGE CITY, IA 51041
US

Emergency Phone: 712-737-3436

Info Phone: 712-737-3436

Cage: MASTE

Contractor
MASTER PRODUCTS
ORANGE CITY, IA 51041 US

Telephone: 712-737-4996

Cage: MASTE

Ingredients

0.7%

CAS: 64741-41-9

Fraction By Weight: 70%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


1.0%

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <0.5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC (D-100) VP

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 5%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF VAPORS COULD
CAUSE RESPIRATORY IRRITATION. LIQUID COULD IRRITATE OR DAMAGE EYES.
CHRONIC: NONE RECOGNIZED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:CONSULT PHYSICIAN.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. TREAT
SYMPTOMATICALLY. CONSULT MD. EYES: FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. TAKE TO MD FOR MEDICAL
TREATMENT. SK IN: WIPE OFF WITH TOWEL. REMOVE REMAINDER WITH
MINERAL SPIRITS, TURPENTINE, OR LACQUER THINNER. WASH WITH SOAP AND
WATER. REMOVE CONTAMINATED CLOTHING. INGESTION: CALL MD IMMEDIATELY
.

Fire Fighting

Flash Point:103F,39C
Lower Limits:SEE INGS
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, OR FIRE FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . WATER IS UNSUITABLE BUT MAY BE USED TO COOL CLOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARKS, AND FLAME.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES AND ELECTRICAL, STATIC OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. USE NON-SPARKING TOOLS. REMOVE
WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR HEAT, SPARKS, OR
FLAME.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:IN CONFINED AREAS OF POOR VENTILATION, USE
CHEMICAL CARTRIDGE RESPIRATOR OR SELF-CONTAINED BREATHING APPARATUS
(SCBA).
Ventilation:PROVIDE GEN DILUTION/LOCAL EXHAUST VENT IN VOL & PATTERN TO
KEEP TLV & LEL OF MOST HAZ ING, BELOW ACCEPTABLE LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE. EMERGENCY EYEWASH AND DELUGE SHOWER
MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>281F,>138C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:81.95

Stability

Stability Indicator/Materials to Avoid:YES
UNKNOWN.
Stability Condition to Avoid:FIRE, BURNING, AND WELDING.
Hazardous Decomposition Products:FIRE, BURNING AND WELDING MAY GENERATE
CARBON MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.