CHQBD - 40/60 ROSIN CORE
- MSDS: CHQBD
- Manufacturer: ALPHA METALS INC
- Product Name: 40/60 ROSIN CORE
- National Stock Number: 3439-00D007441
Product Identification
Product ID:40/60 ROSIN CORE
MSDS Date:08/07/1992
FSC:3439
NIIN:00D007441
MSDS Number: CHQBD
Responsible Party
JERSEY CITY, NJ 07304
US
Emergency Phone: 201-434-6778(CHEMTREC 800-424-9300)
Info Phone: 201-434-6778
Cage: EO354
Contractor
Telephone: 201-434-6778
Cage: 0NBN5
Ingredients
ROSIN ACID
CAS: 8050-09-7
LEAD (SARA 313) (CERCLA)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.05MG/M3, A3; 9596
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9596
Hazards
LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT A HAZARD AS SHIPPED/STORED. HAZARD
OCCURS WHEN PRODUCT USED IN SOLDERING. SKIN CONTACT WITH HOT METAL
MAY CAUSE BURNS. EXCESSIVE INHALATION OF SOLDERING FUMES MAY CAUSE
ANEMIA, INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA, ABDOMINAL PAIN.
PROLONGED OVEREXPOSURE MAY RESULT IN KIDNEY DAMAGE AND NERVOUS
SYSTEM INVOLVEMENT
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN BURNS, IRRITATION, EYE IRRITATION, ANEMIA,
INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA, ABDOMINAL PAIN, KIDNEY
DAMAGE, NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD AND
BLOOD-FORMING ORGANS, KIDNEYS, NERVOUS AND POSSIBLY REPRODUCTIVE
SYSTEMS.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. IF OCCURS,
KEEP HEAD BELOW HIPS. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.
Accidental Release
Spill Release Procedures:AVOID INHALATION OF SOLDER FUMES OR DUST.
VACUUMING IS RECOMMENDED. DO NOT USE DRY SWEEPING OR COMPRESSED AIR
CLEANING SYSTEMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:FOOD AND DRINK SHOULD NOT BE CONSUMED
OR TOBACCO PRODUCTS USED, NOT COSMETICS APPLIED IN AREAS WHERE
SOLDER MAY BE USED. ALWAYS WASH HANDS.
Other Precautions:SINCE EMPTY CONTAINERS MAY RETAIN RESIDUES, ALL
LABELED HAZARD PRECAUTIONS MUST BE OBSERVED. FOR INDUSTRIAL USE
ONLY. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:A NIOSH APPROVED DUST/FUME RESPIRATOR SHOULD BE
WORN WHERE APPLICABLE LIMITS MAY BE EXCEEDED.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:RECOMMENDED TO REDUCE BURN EXPOSURE.
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES W/SIDES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
WORK CLOTHES SHOULD BE WORN AND LAUNDERED IN ACCORDANCE WTIH CURRENT
OSHA LEAD STANDARDS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Viscosity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GRAY WIRE, NO ODOR, VARIOUS SHAPES AND SIZES
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THE SMOKE FROM A SOLDERING OPERATION
USING THIS PRODUCT MAY CONTAIN A TRACE OF AMMONIA.
Disposal
Waste Disposal Methods:SCRAP OR SOLID WASTE SHOULD BE RECYCLED OR
STORED IN SEALED DRY CONTAINERS FOR LATER DISPOSAL. DISPOSAL SHOULD
BE IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.