CHTKW - 80 731 GYMSEAL GLOSS
- MSDS: CHTKW
- Manufacturer: VALSPAR CORP
- Product Name: 80 731 GYMSEAL GLOSS
- National Stock Number: 8010-00N088375
Product Identification
Product ID:80 731 GYMSEAL GLOSS
MSDS Date:09/05/1997
FSC:8010
NIIN:00N088375
MSDS Number: CHTKW
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13418
Contractor
Telephone: 612-332-7371/800-228-5635
Cage: 13418
Ingredients
NAPHTHA (PETROLEUM), HEAVY STRAIGHT RUN
CAS: 64741-41-9
Fraction By Weight: 15%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 20%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9495
DIPENTENE
CAS: 138-86-3
RTECS: OS8100000
Fraction By Weight: 5%
OSHA PEL N/K
ACGIH TLV: 100.00 PPM (MFR)
KEROSENE (PETROLEUM) HYDROTREATED; (MINERAL SPIRITS)
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 10%
OSHA PEL 100.00 PPM (MFR)
ACGIH TLV: 100.00 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED. MAY AFFFECT
THE BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION. OVEREXPOSURE TO
INGREDIENTS IN THIS PRODUCT MAY C AUSE NOSE AND THROAT IRRITATION,
EYE IRRITATION, SKIN IRRITATION. CHRONIC: NOTICE: REPORTS HAVE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE CONT ENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:EYE: FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES AND GET MEDICAL ATTENTION. SKIN: WASH THOROUGHLY WITH SOAP
AND WATER. INHALATION: IF AFFECTED BY INHALATION OF VAPOR OR SPRAY
MIST, REMOVE TO FRESH AIR. INGESTION: GET MEDICAL ATTENTION
IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:103F,39C
Lower Limits:1.00%
Upper Limits:7.00%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT COOL WITH
WATER SPRAY.
Unusual Fire/Explosion Hazard:CNTNS OXIDIZING MATLS. CONTAMD RAGS,
WIPES, SAWDUST, ETC MAY CATCH FIRE SPONTANEOUSLY. STORE WASTE UNDER
WATER IN CLSD METAL CNTNRS UNTIL DISPOSED (SUPDAT)
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS OR NIOSH APPROVED
AIRMASK FOR LARGE SPILLS IN A CONFINED AREA. AVOID CONTACT WITH
EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAMES. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT STORE ABOVE
120 DEG F.
Other Precautions:BASED ON PROD FL PT & VAP PRESS SUITABLE STORAGE
SHOULD BE PROVIDED I/A/W/OSHA REGULATIONS 1910.106. EMPTY CNTNRS
MAY CNTN PROD RESIDUE, INCL FLAMM/EXPLOSIVE VAP. DO NOT CUT,
PUNCTURE/WELD ON/NEAR CNT NR. ALL LABEL WARNINGS MUST (SUPDAT)
Exposure Controls
Respiratory Protection:UNLESS AIR MONITORING DEMONSTRATES VAP/MIST
LEVELS ABOVE APPLICABLE LIMS, NO RESP IS REQD. IF RESP IS REQD,
APPROP, PROPERLY FITTED RESP (NIOSH APPRVD) SHOULD BE WORN DURING
APPLICATION. FOLLOW RESP M FR'S DIRECTIONS FOR RESP USE.
Ventilation:REQUIRED FOR SPRAYING OR IN CONFINED AREA, VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: OF IN COMPLIANCE WITH ALL APPLICABLE REGULATIONS. OTHER
PREC: BE OBSERVED UNTIL THE CONTAINER HAS BEEN CLEANED OR
RECONDITIONED.
Chemical Properties
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:10.0 @ 98F
Vapor Density:5.1
Spec Gravity:0.88
VOC Pounds/Gallon:445
VOC Grams/Liter:3.72
Evaporation Rate & Reference:1.0 (BUTYL ACETATE =1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:56.61
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:AMMONIA COMPOUNDS, PHENOLICS, NITROGEN
OXIDES, CARBON DIOXIDE/MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.