Product ID:AMBERLITE IRC718 RESIN, 74429
MSDS Date:11/05/1997
FSC:6810
NIIN:00N090006
Status Code:A
MSDS Number: CHXJY

ROHM AND HAAS CO

100 INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19106-2399
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

NON-HAZARDOUS INGREDIENTS; (MODIFIED DVB/STY/IMINODIACETATE

Fraction By Weight: 30-34%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 66-70%

OSHA PEL N/K

ACGIH TLV: N/K

A

RTECS: 9999999ZZ

FOR INFORMATION ON THE DESIGN, INSTALLATION, USE,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAN CAUSE EYE IRRITATION.
CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD IF IRRITATION PERSISTS. SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. SEE MD . INHALATION: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN OR ARTIFICIAL RESPIRATION) .
INGESTION: CALL MD IMMEDIATELY .

Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WEAR GLOVES MADE OF COTTON OR CANVAS. WEAR
SAFETY GLASSES (ANSI Z87.1 OR APPROVED EQUIVALENT). FLOOR MAY BE
SLIPPERY; USE CARE TO AVOID FALLING. TRANSFER SPILLED MATERIAL TO
SUITABLE CONTAINERS FOR RE COVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN RECOMMENDED STORAGE TEMPERATURE IS
0C/32F. MAX RECOMMENDED STORAGE TEMPERATURE IS 60C/140F. KEEP FROM
FREEZING; MATL STABILITY MAY BE AFFECTED.
Other Precautions:MAX RECOMMENDED OPERATING TEMP IS 150F/300F. PROPERLY
DESIGNED EQUIP IS VITAL IF THESE RESINS ARE TO BE USED IN
CONJUCTION W/STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID TO PREVENT
RAPID BUILD-UP OF PR ESSURE & POSSIBLE EXPLOSION. (SUP DAT)

Respiratory Protection:A NIOSH APPROVED RESPIRATORY PROTECTION PROGRAM
MEETING OSHA 1910.134 AND ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED
WHENEVER WORKPLACE CONDITIONS WARRANT A RESPIRATOR'S USE. NONE
REQUIRED UNDER NORMAL OPERATING CONDITIONS.
Ventilation:THE VENTILATION SYSTEM EMPLOYED IS DEPENDENT ON THE USER'S
SPECIFIC APPLICATION OF THIS MATERIAL. (ING 3)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 8-9 AQUEOUS SLURRY. OTHER PREC: CONSULT SOURCE KNOWLEDGEABLE IN
HNDLG OF THESE MATLS BEFORE PROCEEDING. DO NOT PACK COLUMN W/DRY
IRON EXCHANGE RESINS. DRY BEADS EXPAND WHEN WETTED; THIS EXPANSION
CAN CAUSE GLASS COLUMNS TO SHATTER.

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17 @ 20C
Vapor Density:<1
Spec Gravity:1.05 (H*20=1)
pH:SUPDAT
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:TAN BEADS
Percent Volatiles by Volume:66-70

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
MONOMER VAPORS.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL ME THOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.