CHZSF - PCF 105 CUTTING & TAPPING FLUID 3556
- MSDS: CHZSF
- Manufacturer: APOLLO INDUSTRIES INC
- Product Name: PCF 105 CUTTING & TAPPING FLUID 3556
- National Stock Number: 6850-00F056798
Product Identification
Product ID:PCF 105 CUTTING & TAPPING FLUID 3556
MSDS Date:12/18/1996
FSC:6850
NIIN:00F056798
Status Code:A
MSDS Number: CHZSF
Responsible Party
SMYRNA, GA 30082
US
Emergency Phone: 404-433-0210/800-533-3548
Info Phone: 404-433-0210/800-533-3548
Cage: APLLI
Contractor
Telephone: 404-433-0210
Cage: APLLI
Ingredients
SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,
CAS: 64742-54-7
RTECS: PY8035500
OSHA PEL 5 MG/CUM (MIST)
PROPANE (DIMETHYLMETHANE) *98-2*
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
BUTANE, N-BUTANE *98-2*
CAS: 106-97-8
RTECS: EJ4200000
OSHA PEL 800 PPM
ACGIH TLV: 1900 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY IRRITATE NOSE/THROAT.
EYES: MAY IRRITATE & BE HARMFUL. SKIN: IRRITANT. INGESTION: CAUSES
IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, INTOXICATION, DIZZINESS, NAUSEA,
HEADACHE, INDIGESTION, DEFATTING OF SKIN, VOMITING, DIARRHEA
Medical Cond Aggravated by Exposure:PRE-EXISTING LUNG DISORDERS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NEEDED. EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. ASPIRATION
HAZARD. OB TAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:KEEP CONTAINERS COOL USING WATER SPRAY TO
AVOID BURSTING. USE APPROPRIATE EQUIPMENT TO PROTECT PERSONNEL FROM
BURSTING CONTAINERS.
Unusual Fire/Explosion Hazard:DON'T USE NEAR FIRE, SPARKS/FLAME. DON'T
PUNCTURE/INCINERATE CONTAINER. EXPOSURE TO TEMPS ABOVE 120F MAY
CAUSE CONTAINER TO BURST.
Accidental Release
Spill Release Procedures:ABSORB W/INERT MATERIAL, THEN PLACE IN A
CHEMICAL WASTE CONTAINER.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. DON'T USE
NEAR FIRE, SPARKS/FLAME. DON'T PUNCTURE/INCINERATE CONTAINER.
Other Precautions:EXPOSURE TO TEMPERATURES >120F MAY CAUSE CONTAINER TO
BURST.
Exposure Controls
Respiratory Protection:USE RESPIRATOR IN AREAS WHERE TLV IS EXCEEDED.
Ventilation:MAINTAIN ADEQUATE VENTILATION
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:40
Spec Gravity:0.99
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN FOAMY SPRAY W/LOW ODOR
Percent Volatiles by Volume:30
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:FIRE, SPARKS, FLAME, TEMPS >120F.
Hazardous Decomposition Products:CO, CO2, HYDROCARBONS
Disposal
Waste Disposal Methods:DISPOSE OF IAW/LOCAL, STATE & FEDERAL
REGULATIONS. CONTAINERS MAY BE RECYCLED IN AEROSOL CENTERS. BEFORE
RECYCLING, EMPTY THE CAN BY USING THE PRODUCT ACCORDING TO THE
LABEL/WRAP CONTAINER & DISCARD I N THE TRASH. DON'T PUNCTURE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.