Product ID:TECHNI-PLUS EN 25.3 RESIN
MSDS Date:08/01/1997
FSC:8010
NIIN:00N093439
Status Code:A
Kit Part:Y
MSDS Number: CJYVB

Emergency Phone: (800)424-9300

Info Phone: 281-550-1199

Cage: 1B6W8

Telephone: 281-550-1199

Cage: 1B6W8

EPICHLOROHYDRIN-PHENOL-FORMALDEHYDE EPOXY NOVOLAK RESIN;

CAS: 9003-36-5

1,2-EPOXY-3-(2-METHYLPHENOXY)PROPANE; (EPOXY RESIN DILUENT)

CAS: 2210-79-9

RTECS: TZ3700000

MUSCOVITE; (FLAKE FILLER)

CAS: 1318-94-1

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TOXICITY AND EFFECTS OF OVEREXPOSURE:
DERMAL: LD50 = >4000 MG/KG RABBIT. MODERATELY IRRITANT. INGESTION:
LD50 = 6000 MG/KG RABBIT. INHALATION: IRRITANT. EYE CONTACT:
IRRITANT.
Effects of Overexposure:SEE HEALTH HAZARDS.

First Aid:SKIN: FLUSH SKIN WITH WATER AND FOLLOW BY WASHING WITH SOAP
AND WATER. SEEK MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING. SEEK MEDICAL ATTENTION. INHALATION: REMOVE VICTIM TO
FRESH AIR AND PRO VIDE OXYGEN IF BREATHING IS DIFFICULT. SEEK
MEDICAL ATTENTION. EYE CONTACT: FLUSH EYES WITH COPIOUS AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES HOLDING EYELIDS OPEN. SEEK MEDICAL
ATTENTION.

Flash Point Method:PMCC
Flash Point:>132.2C, 270.F
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . DO NOT ENTER CONFINED FIRE SPACE WITHOUT FULL BUNGER
GEAR. COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:FULL BUNKER GEAR SHOUD BE WORN IN
CONFINED AREAS.

Spill Release Procedures:DIKE AND CONTAIN, THEN PUMP TO SECURE
CONTAINERS. CLEAN RESIDUE WITH ABSORBENT.

Handling and Storage Precautions:KEEP AWAY FROM STRONG OXIDIZING ACIDS
AND ORGANIC BASES. RECOMMENDED MAXIMUM STORAGE TEMPERATURES IS
100F. TYPICAL SHELF LIFE: INDEFINITELY WHEN STORED IN TIGHTLY
SEALED CONTAINERS.

Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR CANISTER MASK.
Ventilation:LOCAL EXHAUST AND MECHANICAL VENTILATION.
Protective Gloves:NEOPRENE/NATURAL RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH AND DELUGE SHOWER .
Supplemental Safety and Health

Spec Gravity:1.2 25C/77F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PIGMENTED LIQUID RESIN; PLEASANT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND ORGANIC BASES.
Stability Condition to Avoid:STORAGE NEAR STRONG OXIDIZING AGENTS AND
ORGANIC BASES. CONDITIONS CONTRIBUTING TO INSTABILITY: AVOID
AMINES, STRONG LEWIS OR MINERAL ACIDS, STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES, ACIDS AND
OTHER ORGANIC SUBSTANCES.

Waste Disposal Methods:DISPOSE OF PROPERLY IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport Information:DOT - SHIPPING NAME: EPOXY ADHESIVE. SHIPPING
NUMBER: N/A. HAZARD CLASS: N/A. FREIGHT CLASSIFICATION: ADHESIVE.