Product ID:S-W 2216 B/A PART A GRAY EPOXY ADHV. 32.
MSDS Date:04/18/1995
FSC:8040
NIIN:00-145-0432
MSDS Number: CKBQC

3M GENERAL OFFICES

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 651-733-1110

Info Phone: 612-733-1110

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

AMINE TERMINATED POLYMER- N.J. TRADE SECRET (T.S.) REGISTRY

RTECS: AT1005687

CAOBIN

CAS: 1332-58-7

RTECS: GF1670500

OSHA PEL 10 MG/M3

ACGIH TLV: 2 MG/M3

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:CHEMICAL RELATED EYE
BURNS(CHEMICAL CORROSIVITY):CLOUDY APPEARANCE OF CORNEA,CHEMICCAL
BURNS,PAIN,TEARING,ULCERS,IMPAIRED VISION/LOSS OF VISION.VAPORS
FROM HEATED MATERIAL MAY CAUSE EYE IR RITATION.DUST CREATED BY
CUTTING,GRINDING,SANDING,/MACHINING MAY CAUSE EYE IRRITATION.SKIN
CONTACT:ALLERGIC SKIN
REACTION:REDNESS,SWELLING,BLISTERING,&ITCHING.MILD SKIN IRRITATION
REDNESS,SWELLING&ITC HING.*
Effects of Overexposure:*INH:IRRTATION(UPPER RESP.SORENESS OF
NOSE&THROAT,COUGHING&SNEEZING.VAPORS OF HEATED MATERIAL:RESP.SYSTEM
IRRTATION.DUST F/CUTTING,GRINDING,SANDING,/MACHININNG:IRRITATION OF
RESP.SYSTEM.INGESTION:IRRT ATION OF GI
TISSUES:PAIN,VOMITING,ABDOMINAL TENDERNESS,NAUSEA,BLOOD IN
VOMITUS&FECES.EXPOSURE IN NORMAL STORAGE&HANDLING HAS NOT BEEN
REPORTED-CAUSE SIGNIFICANT ADVERSE HEALTH EFFECTS.UNDER NORMAL PRO
CESSING CONDITIONS,E.G.GRINDING/HEATING,MAY RELEASE FUMES&VAPORS OF
PROCESS RELEASES MAY PRODUCE IRRITATION/ANY HEALTH EFFECTS LISTED
ABOVE WHEN EMISSIONS ARE PRESENT@ELEVATED CONCENTRATIONS.USE W/APP
ROPRIATE LOCAL EXHAUST VENTILATION.

First Aid:EYE CONTACT: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT: IMMEDIATELY WASH SKIN WITH SOAP AND LARGE AMOUNTS OF
WATER. REMOVE CONTAMINATED CLOTHING. IF SIGNS/SYMPTOMS OCCUR,
CALL A PHYSICIAN. WASH CONTAMINATED CLOTHING BEFORE REUSE AND
DISPOSE OF CONTAMINATED SHOES. INHALATION: IF SIGNS/SYMPTOMS
OCCUR, REMOVE PE RSON TO FRESH AIR. IF SIGNS/SYMPTOMS CONTINUE,
CALL A PHYSICIAN. INGESTION: IF SWALLOWED DO NOT INDUCE
VOMITING. DRINK TWO GLASSES OF WATER, CALL A PHYSICIAN.

Extinguishing Media:WATER, CO2, FOAM, AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET, SELF CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND
BREATHING APPARATUS, BUNKER COAT AND PANTS, BANDS AROUND ARMS,
WAIST AND LEGS, FACE MASK, AND PROT ECTIVE COVERING FOR EXPOSED
AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:REFER TO OTHER SECTIONS OF THIS MSDS FOR
INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY
PROTECTION, VENTILATION, PERSONAL PROTECTIVE EQUIPMENT. CALL
612-733-1110 OR 612-733-6100 FOR 2 4 HOUR SPILL ASSISTANCE. COVER
WITH ABSORBENT MATERIAL. COLLECT SPILLED MATERIAL. PLACE IN A
U.S. DOT APPROVED CONTAINER AND SEAL .

Handling and Storage Precautions:STORE AWAY FROM HEAT. KEEP OUT OF THE
REACH OF CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.

Respiratory Protection:AVOID INHALATION OF VAPORS. AVOID INHALATION OF
DUST CREATED BY CUTTING, SANDING OR GRINDING. SELECT ONE OF THE
FOLLOWING NIOSH-APPROVED RESPIRATORS BASED ON AIRBORNE
CONCENTRATION OF CONTAMINANTS A ND IN ACCORDANCE WITH OSHA
REGULATIONS: HALF-MASK DUST RESPIRATOR.
Ventilation:USE IN A WELL-VENTILATED AREA. IF EXHAUST VENTILATION IS
NOT ADEQUATE, USE APPROPRIATE RESPIRATORY PROTECTION.
Protective Gloves:POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection:WEAR VENTED GOGGLES. WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE WHEN USING THIS
PRODUCT. WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WTER. DO NOT
INGEST.
Supplemental Safety and Health
PROVIDE APPROPRIATE LOCAL EXHAUST FOR GRINDING, CUTTING OR SANDING
CURED MATERIAL. CURING OVENS MUST BE EXHAUSTTED TO OUTDOORS OR TO
A SUITABLE EMISSION CONTROL DEVICE.

Spec Gravity:1.26 (WATER= 1)
Viscosity:40000-80000 CPS
Appearance and Odor:GRAY PASTE/ PUNGENT ODOR

Stability Indicator/Materials to Avoid:YES
HEAT IS GENERATED DURING CURE. DO NOT CURE A MASS LARGER THAN 50-
GRAMS IN A CONFINED SPACE TO PREVENT A PREMATURE REACTION
(EXOTHERMIC) WITH PRODUCTION OF INTENSE HEAT AND SMOKE.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, AMINE
COMPOUNDS, TOXIC VAPORS, GASES OR PARTICULATES.

Waste Disposal Methods:CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL
INCINERATOR. DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL
IN A SANITARY LANDFILL.

Toxicological Information:*OTHER: EXPOSURE TO THIS MATERIAL IN NORMAL
STORAGE AND HANDLING HAS NOT BEEN REPORTECD TO CAUSE SIGNIFICANT
ADVERSE HEALTH EFFECTS. HOWEVER, UNDER NORMAL PROCESSING
CONDITIONS, E.G. GRINDING OR HEAT ING, THIS PRODUCT MAY RELEASE
FUMES ANDVAPORS OF VARIABLE COMPOSITION BASED ON SPECIFFIC PROCESS
CONDITIONS. THESE PROCESS RELEASES MAY PRODUCE IRRITATION OR ANY OF
THE HEALTH EFFECTS LISTED ABOVE WHE N THE EMISSIONS ARE PRESENT AT
ELEVATED CONCENTRATIONS. USE WITH APPROPRIATE LOCAL EXHAUST
VENTILATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

State Regulatory Information:NFPA HAZARD
CODES:HEALTH:1,FIRE:0,REACTIVITY:1,EPCRA
HAZARD:FIRE:NO,PRESSURE:NO,REACTIVITY:NO,ACUTE:YES,CHRONIC:YES
INFORMATION BELIEVED CORRECT AS OF DATE ISSUED.3M MAKES NO
WARRANTIES.EXPRESSED/I MPLIED.INCLUDING,BUT NOT
LIMITED-IMPLIED WARRANTY OF MERCHANTABILITY/ITNESS FOR
PURPOSE/COURSE OF PERFORMANCE/USAGE OF TRADE.USER
RESPONSIBLE FOR DETERMINING IF FIT FOR PURPOSE&SUITABLE FOR
METHOD OF APPLICATION.**