CKFBF - CAULK

  • MSDS: CKFBF
  • Manufacturer: DAP INC
  • Product Name: CAULK
  • National Stock Number: 8030-01-347-0969
Product Identification

Product ID:CAULK
MSDS Date:04/25/1991
FSC:8030
NIIN:01-347-0969
Status Code:A
MSDS Number: CKFBF

Responsible Party
DAP INC
DAYTON, OH 45401-0277
US

Emergency Phone: 1800-535-5053

Info Phone: 1-800-535-5053

Cage: 90300

Contractor
DAP INC.
277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

Ingredients

ALL INGREDIENTS ARE NOT REGULATED BY OSHA AND ARE

Hazards

Health Hazards Acute and Chronic:PROLONGED OR REPEATED CONTACT WITH
SKIN MAY CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. CONTACT A PHYSICIAN
IMMEDIATELY INGESTION: DO NOT INDUCE VOMITING. CONTACT A
PHYSICIAN OR REGIONAL POISON CONTROL CENTER IMMEDIATELY.

Fire Fighting

Flash Point Method:SCC
Flash Point:>93.3C, 200.F
200F
Extinguishing Media:FOAM, WATER, DRY CHEMICALS.

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL AND PLACE INTO CONTAINERS.

Handling

Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. SPECIAL HANDLING/ STORAGE : KEEP CONTAINERS AWAY
FROM EXCESSIVE HEAT AND FREEZING. KEEP CONTAINERS TIGHTLY CLOSED
WHEN NOT IN USE. DO NOT STORE AT TEMPERA TURES ABOVE 120' F. KEEP
OUT OF REACH OF CHILDREN.

Exposure Controls

Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:RECOMMENDED FOR PROLONGED OR REPEATED CONTACT WITH
SKIN.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS RECOMMENDED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE
Supplemental Safety and Health

Chemical Properties

Vapor Pres:17.5 MM HG @ 68'F
Vapor Density:Volatile Org Content %:10
Spec Gravity:1.73 AIR=1
Evaporation Rate & Reference:<1.BUTYL ACETATE
Appearance and Odor:COLORED PASTE W/ SLIGHT AMMONIA ODOR.
Percent Volatiles by Volume:20-25
Corrosion Rate:VOC=10-15

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATED AT A
PERMITTED FACILITY.

Toxicology

Toxicological Information:WHEN HEATED TO TEMPERATURES ABOVE 150 DEGREES
C IN THE PRESENCE OF AIR, PRODUCT CAN FORM FORMALDEHYDE VAPORS.
FORMALDEHYDE IS A POTENTIAL CANCER HAZARD, A KNOWN SKIN AND
RESPIRATORY SENSITIZER AND AN IRRITANT TO THE EYES, NOSE , THROAT,
SKIN AND DIGESTIVE SYSTEM. SAFE HANDLING CONDITIONS MAY BE
MAINTAINED BY KEEPING.VAPOR CONCENTRATIONS WITHIN THE OSHA EXPOSURE
LIMIT FOR FORMALDEHYDE.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Regulatory

SARA Title III Information:SARA SECTION 312 HAZARD CLASS: ACUTE
State Regulatory Information:SUPPLEMENTAL STATE COMPLIANCE INFORMATION:
PA: 007631869 SILICA, AMORPHOUS; 070131678 DIMETHYL SILOXANE,
HYDROXYL-TERMINATED; MA: 007631869 SILICA, AMORPHOUS; NJ:
007631869, SILICA, AMORPHOUS, FUMED, #1655; 004253343
METHYLTRIACETOXYSILANE; 007689779 ETHYLTRIACETOXYSILANE; 070131678
DIMETHYL SILOXANE, HYDROXY-TERMINATED.