Product ID:CAULK NON-SAG AA-595
MSDS Date:10/13/1998
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CKGWB

NELSON FIRESTOP PRODUCTS

4041 S SHERIDAN ROAD
TULSA, OK 74145
US

Emergency Phone: 918-627-5530; 800-331-7325

Info Phone: 918-627-5530; 800-331-7325

Cage: 76714

NELSON FIRESTOP PRODUCTS

TULSA, OK 74145 US

Telephone: 800-331-7325/918-627-5530

Cage: 76714

IRON OXIDE; (IRON OXIDE AS FE (O*N))

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 2%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3;2 PPM

TRIS(METHYL-ETHYL-KETOXIMO)-SILANE) (5 PPM)

CAS: 22984-54-9

Fraction By Weight: 1%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE NOTED CHRONIC: NONE NOTED.
Effects of Overexposure:NONE ESTABLISHED OR NOTED. NORMALLY CONTACT IS
BY SKIN (HANDS). MATERIAL IS NORMALLY CLEANSED FROM HANDS WITH OUT
AFFECT. NO EVIDENCE OF ADVERSE AFFECTS.
Medical Cond Aggravated by Exposure:NONE ESTABLISHED OR AVAILABLE AT
THIS TIME.

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES CONSULT
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO
FRESH AIR. INGESTION: AS WITH SWALLOWING ANY FOREIGN SUBSTANCE,
CONSULT A PHYSICI AN.

Extinguishing Media:FOR SURROUNDING COMBUSTIBLES WATER, SPRAY FOG OR
STREAM - FOAM, OR INERT GAS CO*2.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . LARGE FIRE, USE WATER FOG, SPRAY OR STREAM. THERMAL
DECOMPOSITION OF SURROUNDING MATERIALS USE CREATE TOXIC FUMES.
Unusual Fire/Explosion Hazard:SAME AS ABOVE.

Spill Release Procedures:USE COMMON CLEAN-UP PROCEDURES MINERAL SPIRITS
MAY BE USED.

Handling and Storage Precautions:PROTECT FROM WEATHER EXTREMES.

Respiratory Protection:NOT USUALLY REQUIRED IS NORMAL USE. NIOSH
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . AS REQUIRED TO MEET LOCAL INDUSTRIAL STANDARDS.
Work Hygienic Practices:INDUSTRIAL HYGIENE AND SAFETY PRACTICES SHOULD
BE OBSERVED.
Supplemental Safety and Health

Boiling Pt:>300.C, 572.F
Melt/Freeze Pt:>175.C, 347.F
Vapor Density:N/K(AIR=1)
Spec Gravity:1.17 @ 68F
Solubility in Water:NOT
Appearance and Odor:BRICK RED; MODERATE ODOR.

Stability Indicator/Materials to Avoid:YES
AS A NORMAL PRECAUTION, STRONG MINERAL ACIDS AND OR OXIDIZING AGENTS
SHULD BE AVOIDED.
Stability Condition to Avoid:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Federal Regulatory Information:ALL CONSTITUENTS OF PRODUCT ARE TSCA
LISTED.