CKMQF - PUROLITE C-100 H ION EXCHANGE RESIN

Product Identification

Product ID:PUROLITE C-100 H ION EXCHANGE RESIN
MSDS Date:01/01/2000
FSC:6810
NIIN:01-388-8971
Status Code:A
Kit Part:Y
MSDS Number: CKMQF

Responsible Party
THE PUROLITE CO, DIV OF BRO TECH CORPORATION
150 MONUMENT RD
BALA-CYNWYD, PA 19004-1713
US

Emergency Phone: 610-668-9090

Info Phone: 610-668-9090

Cage: 67168

Contractor
THE PUROLITE CO, DIV OF BRO TECH CORPORATION
BALA-CYNWYD, PA 19004-1713 US

Telephone: 610-668-9090

Cage: 67168

Ingredients

NONE

Hazards

Medical Cond Aggravated by Exposure:EYE CONTACT: LIKE OTHER FOREIGN
BODIES, PARTICLES MAY CAUSE MECHANICAL IRRITATION OF THE EYE.

First Aid

First Aid:EYE: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15 MINS.
CONSULT PHYSICIAN IF IRRITATION PERSISTS.

Fire Fighting

Autoignition Temp:=426.7C, 800.F
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED, PRESSURE DEMAND,
SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.

Handling

Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49 DEG C (120 DEG F) AND ABOVE 0 DEG C
(32 DEG F).

Exposure Controls

Respiratory Protection:NONE.
Ventilation:LOCAL EXHAUST: NORMAL ROOM VENTILATION.
Protective Gloves:NONE.
Eye Protection:SAFETY GLASSES (ANSI Z87.1).
Other Protective Equipment:NONE
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
ITEM IS A TWO PART KIT. KIT CONTAINS TWO 5 GALLON PAILS OF CATION AND
TWO 5 GALLON PAILS OF ANION; FORM: CERAMIC BEAD.

Chemical Properties

HCC:N1
Spec Gravity:APPROX 1.26 (H20=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER TO MAHOGANY COLORED SPERICAL BEADS WITHOUT
ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES OVER 220 DEG C (424 DEG
F).
Hazardous Decomposition Products:SO2, SO3, CO, CO2, STYRENE MONOMER,
DIVINYLBENZENE.

Disposal

Waste Disposal Methods:MUST BE DISPOSED OF IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.