CKTYQ - ACCESS CK-MB DILUENT, 33306

Product Identification

Product ID:ACCESS CK-MB DILUENT, 33306
MSDS Date:09/08/1995
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CKTYQ

Responsible Party
SANOFI DIAGNOSTICS PASTEUR
1000 LAKE HAZELTINE DR
CHASKA, MN 55318
US

Emergency Phone: 800-666-7111

Info Phone: 800-666-7111; 612-448-4848

Cage: 0TEN9

Contractor
SANOFI DIAGNOSTICS PASTEUR
CHASKA, MN 55318 US

Telephone: 800-666-7111; 612-448-4848

Cage: 0TEN9

Ingredients

BOVINE SERUM ALBUMIN (BSA)

CAS: 9048-46-8


SODIUM AZIDE (NAN3)

CAS: 26628-22-8

RTECS: VY8050000

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL CYSTEINE


CITRIC ACID. (H3C6H5O7.H2O)

CAS: 5949-29-1

RTECS: GE7810000


MISC. INORGANIC SALT (I.E. NA2HPO4)


WATER. H2O

CAS: 7732-18-5

RTECS: ZC0110000

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUTION! THIS MATERIAL CONTAINS
NON-STERILE BOVINE SERUM ALBUMIN. THE POTENTIAL FOR HUMAN DISEASE
TRANSMISSION EXISTS. HANDLE AS A BIOHAZARD, CLASS II (CDC/NIH
GUIDELINES). BOVINE SERUM ALBUMIN (BSA ): POTENTIALLY INFECTIOUS
MATERIAL IF SKIN IS PENETRATED AND/OR MUCOUS MEMBRANES ARE EXPOSED.
HANDLE AS POTENTIALLY INFECTIOUS MATERIALS IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS. SODIUM AZIDE: MAY REACT WITH
LEAD AND COPPER PLUMBING TO FORM HIGHLY EXPLOSIVE METAL AZIDES. ON
DISPOSAL, FLUSH WITH A LARGE VOLUME OF WATER TO PREVENT AZIDE BUILD
UP. SODIUM (EFFECTS OF OVEREXPOS)
Effects of Overexposure:SYMPTOMS OF OVEREXPOSURE MAY INCLUDE: HEADACHE,
RESPIRATORY CONGESTION AND EYE IRRITATION. SKIN CONTACT MY RESULT
IN DERMATITIS. HEALTH HAZARDS (CONT): AZIDE IS A HIGHLY POISONOUS
AGENT. MAY CAUSE E YE, SKIN, AND TISSUE IRRITATION IF SPLASHED,
SPILLED ON THE BODY OR INGESTED. MAY BE FATAL IF INGESTED OR
INJECTED IN QUANTITIES ABOVE THOSE FOUND IN THIS PRODUCT. METHYL
CYSTEINE: NONE. CITRIC ACID: VERY WEAK ACID. MILD EYE, SKIN, AND
RESPIRATORY IRRITANT. NOT HAZARDOUS AT KIT CONCENTRATION. MISC.
INORGANIC SALT: MAY CAUSE TEMPORARY EYE, SKIN AND UPPER RESPIRATORY
TRACT IRRITATION. WATER: NOT AP PLICABLE.

First Aid

First Aid:EYE CONTACT: FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. ENSURE ADEQUATE FLUSHING BY SEPARATING THE
EYELIDS WITH FINGERS WHILE FLUSHING WITH WATER. SKIN CONTACT:
REMOVE CONTAMINA TED CLOTHING. WASH AND RINSE AFFECTED AREA(S)
THOROUGHLY WITH SOAP AND WATER. MAY CAUSE ALLERGIC SKIN REACTIONS.
SWALLOWING: WASH OUT MOUTH WITH WATER. INHALATION: REMOVE FROM
EXPOSURE AREA TO FRESH A IR.

Fire Fighting

Flash Point:NOT APPLICABLE.
Extinguishing Media:WATER, CO2, DRY CHEMICAL OR ALCOHOL FOAM.
Fire Fighting Procedures:NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS AND PROTECTIVE CLOTHING SHOULD BE WORN.
Unusual Fire/Explosion Hazard:COMBUSTION PRODUCTS: NOT FLAMMABLE
(EXCEPT PACKAGING MATERIALS).

Accidental Release

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL AND
APPROPRIATE DISINFECTANT. ABSORB AND PLACE IN A SUITABLE WASTE
CONTAINER. BROKEN GLASS SHOULD BE TREATED AS "SHARPS". SWEEP UP
SOLIDS AND PLACE IN A SUITABLE WASTE CONTAINER. USE UNIVERSAL
PRECAUTIONS AND GOOD CLINICAL LABORATORY PRACTICES. AVOID DIRECT
CONTACT WITH MATERIAL BY WEARING APPROPRIATE PERSONAL PROTECTIVE
EQUIPMENT SUCH AS (NEUTRALIZING AGENT)
Neutralizing Agent:N/P. SPILL PROCEDURES (CONT): GLOVES, FACESHIELD,
LAB COAT, ETC.

Handling

Handling and Storage Precautions:HANDLING: FOLLOW PROPER LABORATORY
SAFETY GUIDELINES FOR CHEMICALS AND BIOLOGICALS. WEAR GLOVES TO
PREVENT SKIN CONTACT. AVOID SPLASHING OR GENERATION OF AEROSOLS.
STORING: STORE AT 2-10C.
Other Precautions:REFER TO ASSAY MANUAL FOR PRODUCT INSERT FOR
ADDITIONAL PRODUCT INFORMATION. REFER TO CHEMICAL SPECIFIC MSDS FOR
ADDITIONAL DATA.

Exposure Controls

Respiratory Protection:A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN .
Ventilation:NORMAL LAB VENTILATION IS ADEQUATE UNLESS AEROSOLS ARE
GENERATED. IF AEROSOLS ARE GENERATED, CONSULT WITH YOUR SAFETY AND
ENVIRONMENTAL HEALTH OFFICER.
Protective Gloves:IMPERVIOUS GLOVES . APPROPRIATE TO PREVENT SKIN
CONTACT.
Eye Protection:ANSI APPROVED CHEMICAL SAFETY GOGGLES AND FULL FACE
SHIELD .
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . LAB COAT OR GOWN TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER REMOVING GLOVES.
Supplemental Safety and Health

Chemical Properties

pH:5 - 9 (DILUENT)
Solubility in Water:REAGENTS SOLUABLE
Appearance and Odor:LIQUID IN GLASS VIALS; ODOR: NONE.

Stability

Stability Indicator/Materials to Avoid:YES
SODIUM AZIDE CAN REACT WITH SOME METALS (SUCH AS LEAD AND COPPER) TO
FORM POTENTIALLY EXPLOSIVE METAL AZIDES .
Stability Condition to Avoid:REACTIVITY: NOT APPLICABLE.

Disposal

Waste Disposal Methods:DISPOSE OF MATERIAL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS. CONTACT YOUR SAFETY AND
ENVIRONMENTAL HEALTH OFFICER FOR DISPOSAL PROCEDURES.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.