CLGDD - FA-1053 MIMM-A-1617, TYPE 1

  • MSDS: CLGDD
  • Manufacturer: CLIFTON ADHESIVE INC
  • Product Name: FA-1053 MIMM-A-1617, TYPE 1
  • National Stock Number: 8040-00-262-9025
Product Identification

Product ID:FA-1053 MIMM-A-1617, TYPE 1
MSDS Date:02/06/1995
FSC:8040
NIIN:00-262-9025
Status Code:A
MSDS Number: CLGDD

Responsible Party
CLIFTON ADHESIVE INC
BURGESS PL
WAYNE, NJ 07470
US

Emergency Phone: 201-694-0845

Info Phone: 201-694-0845; 973-694-0845

Preparer: ERNEST CARTER

Cage: 79833

Contractor
CLIFTON ADHESIVE INC
WAYNE, NJ 07470 US

Telephone: 201-694-0845; 973-694-0845

Cage: 79833

Ingredients

HEXANE

CAS: 110-54-3

RTECS: MN9275000

OSHA PEL 1800 MG/M3;500 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


STYRENE BUTADIENE RUBBER

CAS: 9003-56-9

RTECS: AT6970000


NATURAL RUBBER

CAS: 9006-04-6


TERPINE PHENOL RESIN

Hazards

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:NAUSEA AND/OR NARCOSIS. MAY CAUSE
NERVE DAMAGE. HEXANE MAY CAUSE CENTRAL NERVOUS SYSTEM EFFECTS OR
DAMAGE PERIPHERAL NERVE TISSUE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION TO EYES AND MUCOUS MEMBRANES. CAN
ALSO CAUSE SKIN DRYNESS: LIQUID INGESTION MAY RESULT IN VOMITING.
NUMBNESS, TINGLING AND WEAKNESS OF ARMS AND LEGS.
Medical Cond Aggravated by Exposure:RESPIRATORY ALIMENTS.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH EYES ABUNDENTLY
WITH CLEAN WATER AND REFER TO PHYSICIAN. INGESTION: DO NOT INDUCE
VOMITING.REFER TO PHYSICIAN. EXCESSIVE INHALATION: REMOVE PATIENT
TO FRES H AIR.

Fire Fighting

Flash Point Method:TCC
Flash Point:=-3.7C, 25.F
Autoignition Temp:=265.6C, 510.F
Lower Limits:1.0
Upper Limits:7.5
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
APPARATUS SHOULD BE WORN.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASHBACK.

Accidental Release

Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
OIL-DRI, OR SOL-SPEED-DRI, SHOVEL ABSORBED MATERIAL INTO STEEL
CONTAINER AND COVER.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
AREA. KEEP TIGHTLY CLOSED.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED ATMOSPHERE SUPPLYING OR AIR
PURIFYING RESPIRATOR.
Ventilation:VENTILATION: LOCAL EXHAUST:Protective Gloves:PROTECTIVE
GLOVES: PVA GLOVES.
Eye Protection:EYE PROTECTION: SAFETY GLASSES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
Supplemental Safety and Health
NONE

Chemical Properties

Boiling Pt:=65.C, 149.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:(MM HQ @ TEMP):Vapor Density:3.0
Spec Gravity:0.816
VOC Pounds/Gallon:465
VOC Grams/Liter:3.9
Appearance and Odor:AMBER, MILD HYDROCARBON ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES, SPRKS, HOT
SURFACES, AND OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGUILATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Transport

Transport Information:ADHESIVES, UN1133

Regulatory

State Regulatory Information: