CLKMZ - INTERNATIONAL THINNER GTA007
- MSDS: CLKMZ
- Manufacturer: COURTAULDS COATINGS INC INTERNATIONAL
- Product Name: INTERNATIONAL THINNER GTA007
- National Stock Number: 8010-01-272-4050
Product Identification
Product ID:INTERNATIONAL THINNER GTA007
MSDS Date:05/19/1997
FSC:8010
NIIN:01-272-4050
Status Code:A
MSDS Number: CLKMZ
Responsible Party
HOUSTON, TX 77091
US
Emergency Phone: 800-854-6813
Info Phone: 713-684-1563
Preparer: ERNEST CARTER
Cage: 028S6
Contractor
Telephone: 713-684-1244
Cage: 028S6
Ingredients
XYLENE, MIXTURE OF ISOMERS
CAS: 1330-20-7
RTECS: ZE2100000
ACGIH TLV: 434 MG/M3;100 PPM
ETHYLBENZENE
CAS: 100-41-4
RTECS: DA0700000
OSHA PEL 435 MG/M3;100 PPM
ACGIH TLV: 434 MG/M3;100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL see Table Z-2
ACGIH TLV: 188 MG/M3;50 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: VAPOR MAY AFFECT THE BRAIN
OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES
NOSE AND THROAT IRRITATION. EYE CONTACT: CAUSES EYE IRRITATION.
SKIN CONTACT: CAUSES SKIN IRRITAT ION. INGESTION: MAY BE FATAL IF
SWALLOWED AND MAY CAUSE ORGAN DAMAGE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYE CONTACT: FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES UNTIL IRRITATION PERSISTS. SKIN
CONTACT: FLUSH WITH LARGE AMOUNTS OF WATER. INGESTION: IF
SWALLOWED DO NOT IN DUCE VOMITING. KEEP AT REST. GET PROMPT
MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:CALC
Flash Point:=25.6C, 78.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:1
Upper Limits:NONE
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ABSORB SPILL WITH AN INERT MATERIAL THEN PLACE
IN A CHEMICAL WASTE CONTAINER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A
COOL, WELL VENTILATED PLACE.FOLLOW ALL MSDS/LABEL WARNINGS, EVEN
AFTER THE CONTAINER IS EMPTIED.
Exposure Controls
Respiratory Protection:RESPIRATOR: USEA RESPIRATOR.
Ventilation:PROVIDE SUFFICIENT VENTILATION.
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES, CHEMICAL GOGGLES AND/OR A FACE SHIELD
SHOULD BE WORN.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=137.2C, 279.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Density:HEAVIER
Spec Gravity:.868
Evaporation Rate & Reference:SLOWER/ETHER
Appearance and Odor:LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Toxicology
Toxicological Information:REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.