Product ID:HYSOL EA 956 PART B
MSDS Date:01/10/1995
FSC:8040
NIIN:00-463-7042
Status Code:A
Kit Part:Y
MSDS Number: CLMJL

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

2850 WILLOW PASS ROAD
BAY POINT, CA 94565-3299
US

Emergency Phone: 800-424-9300

Info Phone: 202-483-7616

Preparer: ERNEST CARTER

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

POLYAMIDE RESIN PROPRIETARY

DIETHYLENETRIAMINE

CAS: 111-40-0

RTECS: IE1225000

ACGIH TLV: 4.2 MG/M3;1 PPM

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Health Hazards Acute and Chronic:SIGNS AND SYMPTOMS OF EXPOSURE: SKIN
OR EYE IRRITATION, CHEST DISCOMFORT. IMMEDIATE EFFECTS: MATERIAL IS
CORROSIVE TO EYES AND SKIN. BRIEF CONTACT MAY CAUSE CHEMICAL BURNS.
VAPORS AND MISTS WILL IRRIT ATE NOSE AND THROAT. LONG TERM EFFECTS:
REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN BURNS AND POSSIBLE
ALLERGIC SENSITIZATION.
Effects of Overexposure:THIS MATERIAL IS CORROSIVE TO EYES AND SKIN.
BRIEF CONTACT MAY CAUSE CHEMICAL BURNS. VAPORS AND MISTS WILL
IRRITATE NOSE AND THROAT.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.

First Aid:EYE: FLUSH EYES WITH LOTS OF RUNNING WATER FOR 15 MINUTES.
SKIN: WASH SKIN THOROUGHLY WITH SOAP AND WATER. INHALATION: REMOVE
VICTIM TO FRESH AIR. INGESTION: DRINK PLENTY OF WATER.

Extinguishing Media:DRY CHEMICAL, OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE CLOTHING SUCH AS TURN-OUT GEAR. CARTRIDGE
RESPIRATORS DO NOT PROVIDE ADEQUATE PROTECTION FOR FIRE FIGHTERS OR
EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard:MAY LIBERATE LARGE QUANTITIESOF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIZIED TOXIC GASSES.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES, AND SAFETY
GLASSES. ABSORB SPILL WITH SORBENT MATERIAL SUCH AS VERMICULITE OR
SAND. SCRAPE UP OR SHOVEL INTO DOT APPROVED WASTE CONTAINERS.

Handling and Storage Precautions:THIS PRODUCT MAY BE STORED AT ROOM
TEMPERATURE FOR UP TO 12 MONTHS. HANDLING PRECAUTIONS: HANDLE
EMPTY CONTAINERS AS IF THEY WERE FULL.

Respiratory Protection:A RESPIRATOR.
Ventilation:LOCAL EXHAUST VENTILATION.
Protective Gloves:WEAR BUTYL RUBBER, PVC, OR NITRILE RUBBER GLOVES.
Eye Protection:WEAR SAFETY GLASSES WITH SIDE SHIELDS OR CHEMICAL
GOGGLES.
Other Protective Equipment:AN EYEWASH AND SAFETY SHOWER SHOULD BE
NEARBY AND READY FOR USE.
Supplemental Safety and Health

Boiling Pt:=207.2C, 405.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:MMHG:Vapor Density:AIR=1:>1
Spec Gravity:WATER=1: 0.96
VOC Pounds/Gallon:10
Viscosity:P: 10-30
Solubility in Water:100%
Appearance and Odor:AMBER LIQUID WITH AMMONIACAL ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:(PART B ) IN BATCHES.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:MAY OCCUR.

Waste Disposal Methods:THIS MATERIAL, AS A WASTE, IS NOT CONSIDERED A
RCRA HAZARDOUS WASTE. HOWEVER, INCINERATION IN AN EPA-APPROVED
INCINERATOR IS A PREFERRED DISPOSAL PRACTICE. CHEMICAL ADDITIONS,
PROCESSING, OR OTHERWISE ALTERING THIS MATERIAL MAY MAKE THE WASTE
MANAGEMENT INFORMATION HEREIN INCOMPLETE, INACCURATE,OR O THERWISE
INAPPROPRIATE. FOLLOW STATE AND LOCAL REQ

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.