Product ID:BLUE INDICATING GEL
MSDS Date:06/02/1997
FSC:6850
NIIN:00-880-7000
Status Code:A
MSDS Number: CLMKB

Emergency Phone: 352-237-1220

Info Phone: 352-237-1220

Cage: UO706

Telephone: 918-627-5639

Cage: 1NYF9

SILICA GEL

CAS: 63231-67-4

RTECS: VV7340000

ACGIH TLV: 10 MG/M3

COBALT CHLORIDE (COCL2)

CAS: 7646-79-9

RTECS: GF9800000

LD50 LC50 Mixture:NO DATA PROVIDED BY MANUFACTURER
Health Hazards Acute and Chronic:HEALTH HAZARDS MAY ARISE FROM
INGESTION, INHALATION AND CONTACT WITH THE SKIN OR EYES. INGESTION
MAY RESULT IN DAMAGE TO THE THROAT AND ESOPHAGUS AND/OR
GASTRO-INTESTINAL DISORDER. INHALATION MAY CAUS E BURNING TO THE
UPPER RESPIRATORY TRACT AND/OR TEMPORARY OR PERMANENT LUNG DAMAGE.
PROLONGED OR REPEATED CONTACT WITH THE SKIN, IN THE ABSENCE OF
PROPER HYGIENE, MAY CAUSE DRYNESS, IRRITATION, BURNS OR
CONJUNCTIVITIS.
Explanation of Carcinogenicity:NO DATA PROVIDED BY MANUFACTURER
Effects of Overexposure:HEALTH HAZARDS MAY ARISE FROM INGESTION,
INHALATION AND CONTACT WITH THE SKIN OR EYES. INGESTION MAY RESULT
IN DAMAGE TO THE THROAT AND ESOPHAGUS AND/OR GASTRO-INTESTINAL
DISORDER. INHALATION MAY CAUS E BURNING TO THE UPPER RESPIRATORY
TRACT AND/OR TEMPORARY OR PERMANENT LUNG DAMAGE. PROLONGED OR
REPEATED CONTACT WITH THE SKIN, IN THE ABSENCE OF PROPER HYGIENE,
MAY CAUSE DRYNESS, IRRITATION, BURNS OR CONJUNCTIVITIS.
Medical Cond Aggravated by Exposure:NO DATA PROVIDED BY MANUFACTURER

First Aid:EYES: WASH AFFECTED AREAS IMMEDIATELY AND CAREFULLY FOR 15 TO
20 MINUTES WITH RUNNING WATER. GET MEDICAL ATTENTION IMMEDIATELY.
SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR
IMMEDIAT ELY. IF BREATHING HAS STOPPED GIVE ARTIFICIAL RESPIRATION.
KEEP AFFECTED PERSON WARM AND AT REST. GIVE MEDICAL ATTENTION
IMMEDIATELY. INGESTION: IF LARGE AMOUNTS HAVE BEEN INGESTED, GIVE
EMETICS TO CA USE VOMITING. STOMACH SIPHON MAY BE APPLIED AS WELL.
MILK AND FATTY ACIDS SHOULD BE AVOIDED. GET MEDICAL ATTENTION
IMMEDIATELY. NOTES TO PHYSICIAN: THE PRODUCT IS A DESICCANT AND
GENERATES HEAT AS IT ABSORBS WATER. THE USED PRODUCT CAN

Flash Point:NON-FLAMMABLE
Extinguishing Media:USE DRY CHEMICAL, WATER SPRAY OR FOAM.
Fire Fighting Procedures:NON-FLAMMABLE SOLIDS LIQUIDS OR GASES.: COOL
CONTAINERS THAT ARE EXPOSED TO FLAMES WITH WATER FROM THE SIDE
UNTIL WELL AFTER FIRE IS OUT.
Unusual Fire/Explosion Hazard:NEGLIGIBLE FIRE AND EXPLOSION HAZARD WHEN
EXPOSED TO HEAT OR FLAME BY REACTION WITH INCMPATIBLE SUBSTANCES.

Spill Release Procedures:NOTIFY SAFETY PERSONNEL OF SPILLS OR LEAKS.
CLEAN-UP PERSONNEL NEED PROTECTION AGAINST INHALATION OF DUST OR
FUMES. EYE PROTECTION IS REQUIRED. VACUUMING AND/OR WET MATHODS OF
CLEANUP ARE PREFERRED. P LACE IN APPROPRIATE CONTAINERS FOR
DISPOSAL KEEPING AIRBORNE PARTICULATES AT A MINIMUM.
Neutralizing Agent:NO DATA PROVIDED BY MANUFACTURER

Handling and Storage Precautions:AVOID BREATHING DUST AND PROLONGED
CONTACT WITH SKIN. CAUSE EYE IRRITATION AND BREATHING DUST MAY BE
HARMFUL.
Other Precautions:NO DATA PROVIDED BY MANUFACTURER

Respiratory Protection:PROVIDE A NIOSH/MSHA JOINTLY APPROVED
RESPIRATORY IN THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL. CONTACT
YOUR SAFETY EQUIPMENT SUPPLIER FOR PROPER MASK TYPE.
Ventilation:PROVIDE GENERAL AND/OR LOCAL EXHAUST VENTILATION TO KEEP
EXPOSURES BELOW THE TLV. VENTILATION USED MUST BE DESIGNED TO
PREVENT SPOTS OR DUST ACCUMULATION OR
Protective Gloves:GLOVES
Eye Protection:CHEMICAL SPLASH GOGGES DESIGNED IN COMPLIANCE WITH OSHA
REGULATIONS ARE
Other Protective Equipment:WEAR PROTECTIVE CLOTHING INCLUDING LONG
SLEEVES AND GLOVES, TO PREVENT REPEATED OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:AVOID BREATHING DUST AND PROLONGED SKIN
CONTACT.
Supplemental Safety and Health
NO DATA PROVIDED BY MANUFACTURER

HCC:N1
Melt/Freeze Pt:>1593.3C, ######F
Vapor Pres:NO DATA AVAILABLE
Vapor Density:NO DATA AV
Spec Gravity:NO DATA AVAILABLE
pH:NO DATA AVAILA
Appearance and Odor:WHITE BEADS OR GRANULES; ODORLESS.

Stability Indicator/Materials to Avoid:YES
NO DATA AVAILABLE
Stability Condition to Avoid:NO DATA AVAILABLE
Hazardous Decomposition Products:NO DATA AVAILABLE

Waste Disposal Methods:WHEN DISPOSING OF USED DESICCANT, MATERIAL MUST
BE HANDLED WITH SPECIAL PRECAUTIONS. DESICCANT IS AND ABSORBENT
MATERIAL. FOLLOWING CONTACT WITH TYPICAL PETROCHEMICALS OR GASES
THE COMBUSTION OF DESSI CCANT AND RETAINED MATERIAL CAN BE
HAZARDOUS TOXIC AND/OR FLAMMABLE. IT IS HIGHLY RECOMMENDED THAT A
LL USED DESSICCANT BE ANALYZED TO DETERMINE

Toxicological Information:NO DATA PROVIDED BY MANUFACTURER

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:NO DATA PROVIDED BY MANUFACTURER

Transport Information:NO DATA PROVIDED BY MANUFACTURER

SARA Title III Information:NO DATA PROVIDED BY MANUFACTURER
Federal Regulatory Information:NO DATA PROVIDED BY MANUFACTURER
State Regulatory Information:NO DATA PROVIDED BY MANUFACTURER