CLNJW - E-40,100,1500,

Product Identification

Product ID:E-40,100,1500,
MSDS Date:07/19/1989
FSC:8040
NIIN:01-364-7299
Status Code:A
MSDS Number: CLNJW

Responsible Party
POLYFIX INTERNATIONAL/REDAM CORP
912 ROSS AVENUE
HAMILTON, OH 45013
US

Emergency Phone: 1-800-234-4583

Info Phone: 800-234-4583

Preparer: ERNEST CARTER

Cage: 0M8R1

Contractor
POLYFIX INTERNATIONAL/REDAM CORP
13240 HAMILTON, OH 45013 US

Telephone: 800-234-4583

Cage: 0M8R1

Ingredients

ETHYL CYANOACRYLATE

CAS: 7085-85-0

RTECS: UD3330000


HYDROQUINONE

CAS: 123-31-9

RTECS: MX3500000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:CAUTION: IMMEDIATE BONDING OF SKIN,
EYES OR MOUTH MAY RESULT UPON CONTACT.VAPORS ARE IRRITATING TO
MUSCOUS MEMBRANES AND THE UPPER RESPIRATORY TRACT. KEEP OUT OF
REACH OF CHILDREN.
Effects of Overexposure:IMMEDIATE BONDING OF SKIN, EYES OR MOUTH MAY
RESULT UPON CONTACT. VAPORS ARE IRRITATING TO MUSCOUS MEMBRANES AND
UPPER RESPIRATORY TRACT..
Medical Cond Aggravated by Exposure:SKIN: FLUSH WITH PLENTY WATER.
REMOVED CURED ADHESIVE WITH WARM WATER.

First Aid

First Aid:EYES: HOLD LID OPEN AND IMMEDIATELY FLUSH WITH PLENTY OF
WATER GET MEDICAL ATTENTION IMMEDIATELY. SKIN: FLUSH WITH PLENTY OF
WATER. REMOVE CURED ADHESIVE WITH WARM WATER.

Fire Fighting

Flash Point Method:COC
Flash Point:=91.7C, 197.F
Extinguishing Media:FLUSH WITH LARGE QUANTITIES OF WATER OR DRY
CHEMICAL.
Fire Fighting Procedures:TO PREVENT A POSSIBLE HEALTH HAZARD, WEAR A
SELF CONTAINED BREATHING APPARATUS OVEREXPOSURE OF DECOMPOSED
PRODUCTS.

Accidental Release

Spill Release Procedures:SMALL SPILLED: WIPE UP WITH CLOTH (COTTON
MATERIAL) COULD RESULT IN AUTO-IGNITION. LARGE SPILLED: FLOOD AREA
WITH WATER. WHEN CURED REMOVE CURED FILM. CURED FILM IS NOT
CORROSIVE.

Handling

Handling and Storage Precautions:AVOID UNNECESSARY EXPOSURE TO
AIR&MOISTURE, DO NOT STORE ABOVE 90 F AND IN DIRECT SUNLIGHT. KEEP
CONTAINER LIDS TIGHTLY CLOSED.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. PROTECT EYES, SKIN
AND CLOTHING FROM CONTACT WITH LIQUID PRODUCT. WEAR RECOMMENDED
PROTECTIVE EQUIPMENT.

Exposure Controls

Ventilation:LOCAL EXHAUST: SHOULD BE USED TO CONTROL VAPORS IN WORK
AREA.
Protective Gloves:POLYETHLENE GLOVES, NO RUBBER
Eye Protection:SAFETY GLASSES & W/SHIELD.
Other Protective Equipment:EYE BATH AND WASHING FACILITIES SHOULD BE
NEARBY.
Work Hygienic Practices:NO DUSTY AIR.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:=65.C, 149.F
Vapor Pres:0.05
Vapor Density:4.5
Spec Gravity:1.05
Appearance and Odor:TRANSPARENT, IRRITATING ODOR

Stability

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER. ALCOHOLS, AMINES AND ALKALINE SUBSTANCES.
Stability Condition to Avoid:ABOVE 90 F HEAT, MOISTURE, DIRECT
SUNLIGHT. 10 F-45 F, STORE IN COOL AREA, NO DIRECT SUNLIGHT.
Hazardous Decomposition Products:CO2, OXIDES OF NITROGEN, AND OTHER
UNKNOWN HYDROCARBONS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DO NOT POUR DOWN THE DRAIN. FOLLOW FEDERAL,
STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.DUMP AS CHEMICAL WASTE.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.