Product ID:SILICONE FUSER OIL,S-20,S-400;KF3-9376-000
MSDS Date:06/01/1995
FSC:NIIN:Submitter:N EN
Status Code:A
MSDS Number: CLNYF

Emergency Phone: 800-424-9300

Info Phone: 03-3758-2111

Preparer: JOSEPH PALMERI

Cage: EO160

Telephone: 516-328-5600

Cage: UO424

SILICONE. (MANUFACTURER STATES ALL OTHER INFORMATION IS

CAS: 63148-62-9

RTECS: JT6484500

LD50 LC50 Mixture:LD50 > 5 G/KG (ESTIMATED)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN CHRONIC HEALTH EFFECTS, BUT
UNNECESSARY EXPOSURE TO ANY CHEMICAL SHOULD BE AVOIDED. EFFECTS OF
OVEREXPOSURE: INHALATION: EXPECTED TO BE A LOW HAZARD FOR
RECOMMENDED HANDLING. EYE: NO SPECIF IC HAZARDS KNOWN. MAY CAUSE
TRANSIENT IRRITATION. SKIN: EXPECTED TO BE LOW HAZARD FOR
RECOMMENDED HANDLING. INGESTION: EXPECTED TO BE LOW INGESTION
HAZARD.
Explanation of Carcinogenicity:CARCINOGENICITY CLASSIFICATION
(COMPONENTS PRESENT AT 0.1% OR MORE): NONE. IARC: NONE. ACGIH:
NONE. NTP: NONE. OSHA: NONE.
Medical Cond Aggravated by Exposure:THIS PRODUCT AS WITH ANY CHEMICAL,
MAY ENHANCE CONDITIONS ON CERTAIN PEOPLE. CANNON DOES NOT KNOW OF
ANY MEDICAL CONDITION THAT MIGHT BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid:INHALATION: IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES: ANY MATERIAL THAT CONTACTS
THE EYE SHOULD BE WASHED OUT IMMEDIATELY WITH WATER. GET MEDICAL
ATTENTION I F SYMPTOMS OCCUR. SKIN: WASH WITH SOAP AND WATER. GET
MEDICAL ATTENTION IF SYMPTOMS OCCUR. INGESTION: DRINK 1-2 GLASSES
OF WATER. SEEK MEDICAL ATTENTION.

Flash Point:=321.C, 609.8F
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE (CO*2), DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS (NIOSH
APPROVED; ) AND PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING
FIRES INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard:NONE. IGNITION TEMPERATURE: N/A.
FLAMMABILITY: NON-FLAMMABLE SOLID (ACCORDING TO TEST METHOD
OF 16 CFR 1500.44). HAZARDOUS COMBUSTION PRODUCTS: CARBON
DIOXIDE, CARBON MONOXIDE.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AN CONTAIN
FOR SALVAGE OR DISPOSAL. THIS OIL IF SPILLED MAY PRESENT A SKIDDING
OR SLIPPING HAZARD. FOLLOWING A SPILL OR LEAK, USE ABSOBENT
MATERIAL TO CONTAIN AND COL LECT EXCESS OIL FOR SALVAGE OR
DISPOSAL. THOROUGHLY CLEAN THE FLOOR OR OTHER CONTAMINATED SURFACE
(SUCH AS A LADDER) AND DO NOT LEAVE ANY TRACES OF OIL. USE AN ALL
PURPOSE ALKALINE (ECOLOGICAL INFO)

Handling and Storage Precautions:PERSONAL PRECAUTIONARY MEASURES: USE
WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER HANDLING.
PREVENTION FROM FIRE EXPLOSION: KEEP FROM CONTACT WITH OXIDIZING
MATERIALS. STORAGE: KEEP CONTAINER C LOSED.
Other Precautions:AT ELEVATED TEMPERATURES THIS PRODUCT IS SENSITIVE TO
CONTAMINATION. IF THIS PRODUCT BECOMES CONTAMINATED WITH STRONG
ACIDS, BASES, SOME METALLIC COMPOUNDS OR OXIDIZING AGENTS, THE
FLASH POINT VISCOSI TY MAY CHANGE AND SHOULD BE REDETERMINED.
CONTAMINATED OIL MAY GENERATE FORMALDEHYDE AT TEMPERATURES OF
(TRANSPORT INFO)

Respiratory Protection:NONE SHOULD BE NEEDED. WEAR A NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR THE EXPOSURE OF CONCERN .
Ventilation:GOOD VENTILATION (TYPICALLY 4-6 ROOM VOLUMES PER HOUR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS.
USE WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES SHOULD BE WORN FOR PROLONGED OR
REPEATED SKIN CONTACT
Eye Protection:ANSI APPROVED CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:RECOMMENDED DECONTAMINATION FACILITIES:
WASHING FACILITIES. EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:IT IS GOOD INDUSTRIAL HYGIENE PRACTICE TO
MINIMIZE EYE CONTACT. GOOD INDUSTRIAL HYGIENE PRACTICE SHOULD BE
FOLLOWED WHICH INCLUDES PREVENTING EYE CONTACT, MINIMIZING SKIN
CONTACT, INHALATION.
Supplemental Safety and Health
COMPLETE PRODUCT IDENTITY: PRODUCT NAME: SILICONE FUSER OIL, S-20,
S-400. ITEM NO(S): FG2-5962, KF3-9376-000, KF8-0002, KF8-0005,
FG2-2928, FG2-6031, FG5-3918 (WEIGHT 400 ML TO 1400 ML).
DESCRIPTIO N: SILICONE OIL FOR CANNON COLOR LASER COPIERS.

Melt/Freeze Pt:M.P/F.P Text:N/A (MELTING POINT)
Vapor Pres:LESS THAN 5 MM
Spec Gravity:0.98 (WATER=1)
Evaporation Rate & Reference:LESS THAN 1 (ETHER = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, TRANSPARENT LIQUID . ODORLESS.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:STABLE.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
AND POSSIBLY TOXIC CHEMICALS SUCH AS CARBON MONOXIDE AND SILICON
DIOXIDE.

Waste Disposal Methods:INCINERATE OR LANDFILL, CAN BE INCINERATED WHEN
IN COMPLIANCE WITH LOCAL, REGULATIONS. DISCHARGE, TREATMENT, OR
DISPOSAL MAY BE SUBJECT TO FEDERAL, STATE OR LOCAL LAWS.

Toxicological Information:MUTAGENICITY: SALMONELLA TYPHIMURIUM ASSAY
(AMES TEST): NEGATIVE. HAZARDS IDENTIFICATION: * EMERGENCY
OVERVIEW * LOW HAZARD FOR RECOMMENDED HANDLING. NFPA RATING:
HEALTH = 1, FLAMMABILITY = 1 , REACTIVITY = 0. NOTE: HMIS AND NFPA
RATINGS INVOLVE DATA AND INTERPRETATIONS THAT MAY VARY FROM COMPANY
TO COMPANY. THEY ARE INTENDED ONLY FOR RAPID, GENERAL
IDENTIFICATION OF THE MAGNITUDE OF THE SPECIFIC HAZARD. TO DEAL
ADEQUATELY WITH THE SAFE HANDLING OF THIS MATERIAL, ALL OF THE
INFORMATION CONTAINED IN THIS MSDS MUST BE CONSIDERED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:THIS MATERIAL HAS NOT BEEN TESTED FOR ENVIRONMENTAL EFFECTS.
IN A SPILL SITUATION, MATERIAL MAY BE VISUALLY UNPLEASANT; HOWEVER,
IT IS NOT EXPECTED TO CAUSE ANY ADVERSE ENVIRONMENTAL EFFECTS.
SPILL RELEASE PROCEDURES (CONT): CLEANER, OR HAVE THE
SURFACE (INCLUDING CARPETING) CLEANED COMMERCIALLY. PETROLEUM
DISTILLATES MAY BE USED, EXCEPT ON PLASTIC OR VINYL SURFACES.
DISPOSE OF ABSORBEN T MATERIAL IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE AND LOCAL REQUIREMENTS.

Transport Information:DOT SHIPPING NAME: NOT REGULATED. DOT HAZARD
CLASS: N/A. UN NO: N/A. OTHER PRECAUTIONS (CONT): 150
DEGREES CENTIGRADE AND ABOVE IN THE PRESENCE OF AIR. FORMALDEHYDE
IS A SKIN AND RESPIRATOR Y SENSITIZER EYE AND THROAT IRRITANT, AN
ACUTE TOXICANT AND POTENTIAL CARCINOGEN.

SARA Title III Information:CHEMICALS SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OR TITLE III OF THE SUPERFUND
AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 AND 40 CFR PART
372: NONE. PHYSICAL / CHEMICAL PRO PERTIES (CONT):
SOLUBILITY IN ORGANIC SOLVENTS: SOLUBLE IN ESTERS, KETONES,
AROMATIC SOLVENTS AND OTHER ORGANIC SOLVENTS.
Federal Regulatory Information:TSCA STATUS: ALL CHEMICAL INGREDIENTS
FOUND ON TSCA INVENTORY. RCRA STATUS: IF DISCARDED IN ITS
PURCHASED FORM, THIS PRODUCT WOULD NOT BE A HAZARDOUS WASTE EITHER
BY LISTING OR CHARACTERISTIC. HOWEVE R, THE RCRA, IT IS THE
RESPONSIBILITY OF THE END-USER TO DETERMINE AT THE TIME OF
DISPOSAL, WHETHER A MATERIAL CONTAINING THE PRODUCT OR DERIVED FROM
THE PRODUCT SHOULD BE CLASSIFIED AS HAZARDOUS WAST E. 40 CFR
261.20-24. US / CANADA LABEL STATEMENTS: LOW HAZARD FOR
RECOMMENDED HANDLING. USE WITH ADEQUATE VENTILATION. IN CASE OF
FIRE: USE WATER SPRAY, CARBON DIOXIDE (CO2), OR DRY CHEMICAL. IN
CASE OF A SPILL: (OTHER INFORMATION)
State Regulatory Information:MATERIAL(S) KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER: NONE. MATERIAL(S) KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE ADVERSE REPRODUCTIVE EFFECTS: NONE.
MSDS PREPARER (CONT): PREPARED BY: JOSEPH PALMERI. TITLE:
REGULATORY COMPLIANCE SPECIALIST, QUALITY MANAGEMENT DEPARTMENT.
TELEPHONE NO: (516) 328-5600.