Product ID:"285" ROSIN FLUX CORED SOLDER
MSDS Date:12/11/1998
FSC:3439
NIIN:01-391-8478
Status Code:A
MSDS Number: CLPQD

EAGLE-PICHER TECHNOLOGIES, LLC

3820-SOUTH HANCOCK EXPRESSWAY
COLORADO SPRINGS, CO 80911-1231
US

Emergency Phone: (800) 424-9300

Info Phone: 719-392-4266

Cage: 50120

WHEELER BROS INC

737 SOMERSET, PA 15501-0737 US

Telephone: 814-443-7000

Cage: 55683

LEAD

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

SILVER

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

ANTIMONY

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN

CAS: 8050-09-7

RTECS: VL0480000

Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:TARGET ORGANS: INGESTION OF LEAD METAL
CAN AFFECT KIDNEYS, GASTROINTESTINAL, REPRODUCTIVE AND NEUROLOGICAL
SYSTEMS. ACUTE- INHALATION: OVEREXPOSURE TO LEAD MAY RESULT IN
CENTRAL NERVOUS SYSTEM DISORD ERS CHARACTERIZED BY DROWSINESS,
SEIZURES, COMA AND DEATH. EXPOSURE OF THIS MAGNITUDE IS UNLIKELY.
SKIN CONTACT: NONE. SKIN ABSORPTION: NONE. EYE CONTACT: NONE.
INGESTION: NOT LIKELY TO OCCUR, BUT WOU LD HAVE SIMILAR EFFECTS AS
INHALATION. CHRONIC: REPEATED INHALATION OR INGESTION OF LEAD CAN
RESULT IN SYSTEMIC POISONING.
Effects of Overexposure:TARGET ORGANS: INGESTION OF LEAD METAL CAN
AFFECT KIDNEYS, GASTROINTESTINAL, REPRODUCTIVE AND NEUROLOGICAL
SYSTEMS. ACUTE- INHALATION: OVEREXPOSURE TO LEAD MAY RESULT IN
CENTRAL NERVOUS SYSTEM DISORD ERS CHARACTERIZED BY DROWSINESS,
SEIZURES, COMA AND DEATH. EXPOSURE OF THIS MAGNITUDE IS UNLIKELY.
SKIN CONTACT: NONE. SKIN ABSORPTION: NONE. EYE CONTACT: NONE.
INGESTION: NOT LIKELY TO OCCUR, BUT WOU LD HAVE SIMILAR EFFECTS AS
INHALATION. CHRONIC: REPEATED INHALATION OR INGESTION OF LEAD CAN
RESULT IN SYSTEMIC POISONING.
Medical Cond Aggravated by Exposure:LEAD: DISEASES OF THE BLOOD AND
BLOOD-FORMING ORGANS, KIDNEYS, NERVES AND POSSIBLY REPRODUCTIVE
SYSTEMS.

First Aid:EYE: FOR BURNS FLUSH IMMEDIATELY WITH COOL WATER. SKIN: FOR
BURNS FLUSH IMMEDIATELY WITH COOL WATER. INHALATION: REMOVE PERSON
FROM EXPOSURE TO FUMES. INGESTION: IF THOUGHT TO BE OVEREXPOSED,
THE PERS ON SHOULD HAVE A BLOOD LEAD ANALYSIS DONE. SEEK MEDICAL
ASSISTANCE FOR FURTHER TREATMENT, OBSERVATION AND SUPPORT IF
NEEDED.

Flash Point Method:TOC
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IF
THIS MATERIAL IS IN THE VICINITY OF A FIRE.
Unusual Fire/Explosion Hazard:FLUX IN CORED SOLDER MAY IGNITE WHEN THE
SOLDER MELTS IN A FIRE.

Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN
BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
IS USED TO CUT UP LARGE PIECES.

Handling and Storage Precautions:STORE AWAY FROM SOURCES OF SULFUR.
WASH HANDS AFTER HANDLING SOLDER CONTAINING LEAD BEFORE EATING OR
SMOKING. AVOID BREATHING SMOKE/FUMES GENERATED DURING SOLDERING. DO
NOT PLACE FLUX CORED SOLDER INT O A HOT SOLDER POT BECAUSE THE FLUX
MAY IGNITE.
Other Precautions:USE OF STRONG ACID FLUXES MAY RESULT IN LIBERATION OF
TOXIC LEAD CHLORINE FUMES. CAUTION: EMPTY CONTAINERS MAY CONTAIN
PRODUCT RESIDUE. OBSERVE ALL LABEL PRECAUTIONS.

Respiratory Protection:WHEN VENTILATION IS NOT SUFFICIENT TO REMOVE
FUMES FROM THE BREATHING ZONE, A NIOSH APPROVED RESPIRATOR SHOULD
BE WORN.
Ventilation:PROVIDE ADEQUATE VENTILATION (GENERAL AND/OR LOCAL) IF
NECESSARY TO MEET EXPOSURE REQUIREMENTS. LOCAL EXHAUST VENTILATION
IS PREFERRED
Protective Gloves:USUALLY NOT REQUIRED
Eye Protection:WHEN SOLDERING, USE GOGGLES OR FACE SHIELD
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING SOLDER
CONTAINING LEAD BEFORE EATING OR SMOKING.
Supplemental Safety and Health
DO SOLDERING IN A WELL VENTILAED AREA.

HCC:N1
Spec Gravity:>1
Solubility in Water:0
Appearance and Odor:SILVER-GRAY METAL IN WIRE, RIBBON OR PREFORMED
SHAPES W/ A CORE OF FLUX;NO ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ACID, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:WHEN HEATED TO SOLDERING TEMPERATURES
THE SOLVENT IN THE FLUX WILL BOIL AWAY AND CARRY UP DROPLETS OF
ROSIN AND THERMAL DEGRADATION PRODUCTS SUCH AS ALIPHATIC ALDEHYDES,
ACIDS AND TERPENES. NO LEAD IS
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:SOLDER CAN BE RECLAIMED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.