CLQVR - F-900 TORQUE SEAL (SEALANT)
- MSDS: CLQVR
- Manufacturer: ORGANIC PRODUCTS CO
- Product Name: F-900 TORQUE SEAL (SEALANT)
- National Stock Number: 8030-01-163-3483
Product Identification
Product ID:F-900 TORQUE SEAL (SEALANT)
MSDS Date:01/04/1998
FSC:8030
NIIN:01-163-3483
Status Code:A
MSDS Number: CLQVR
Responsible Party
IRVING, TX 75060-4555
US
Emergency Phone: 972-438-7321
Info Phone: 214-438-7321
Preparer: ERNEST CARTER
Cage: 01195
Contractor
Telephone: 214-438-7321
Cage: 01195
Ingredients
METHANOL
CAS: 67-56-1
RTECS: PC1400000
OSHA PEL 260 MG/M3;200 PPM
ACGIH TLV: 262 MG/M3;200 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHANOL
CAS: 64-17-5
RTECS: KQ6300000
OSHA PEL 1900 MG/M3;1000 PPM
ACGIH TLV: 1880 MG/M3;1000 PPM
Hazards
Effects of Overexposure:MINOR IRRITATION FROM PROLONGED BREATHING.
MINOR IRRITATION TO SKIN AND EYES.
NAUSEA, VOMITING OF SWALLOWED.
First Aid
First Aid:REMOVE TO FRESH AIR. WASH AFFECTED AREAS WITH WATER. IF
SWALLOWED, INDUCE VOMITING.
CALL PHYSICIAN.
Fire Fighting
Flash Point Method:TOC
Flash Point:=42.8C, 109.F
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES,
ALCOHOL FOAM FOR LARGE FIRES.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS WITH
FULL FACE PIECE WITH PRESSURE DEMAND.
Unusual Fire/Explosion Hazard:LIGHT, LIGHTS, FLAMES, SPARKS, HEATERS,
SMOKERS.
Accidental Release
Spill Release Procedures:ABSORB LIQUID; USE ABSORBENT MATERIAL AND
TRANSFER TO HOOD, ELIMINATE ALL IGNITION
SOURCES. DESTROY REMAINING MATERIAL BY INCINERATION.
Handling
Handling and Storage Precautions:WEAR RESISTANT GLOVES SUCH AS
NEOPRENE, EYE PROTECTION, CHEMICAL SPLASH GOGGLES,
PROTECTIVE EQUIPMENT TO PREVENT PROLONGED SKIN CONTACT.
Exposure Controls
Protective Gloves:YES; NEOPRENE.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:=65.6C, 150.F
Vapor Pres:42.00
Appearance and Odor:HEAVY THICK PASTE. ALCOHOL ODOR.
Percent Volatiles by Volume:50%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID HEAT, SPARKS, FIRES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:INCINERATE IN FURNACE, OR BY LIQUID
INCINERATION. IN TOXIC LANDFILL IN ACCORDANCE
WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.